You can check updates to your Sakai sites on your smart phone! Just 

go to http://sakai.wlu.edu/portal/pda and log in. This interface 

makes it much easier to check on your classes when you're not at 

your computer.

Applies To: Faculty, Students

A SMART Board is an interactive whiteboard that allows the professor or students to write notes in digital ink on top of the computer display, and save the work. It is integrated with the computer and the computer displays to the board/screen, but it also allows interaction at the board. The Smart Board is equipped with "digital pens"-pens that write digitally on the screen.

First, unplug the phone from the wall jack and from the back of the phone and then reconnect them.  Many times this will correct the problem.  If this doesn't work, please call the help desk at 4357 or email help@wlu.edu  to report the line not working.

Applies To: Faculty, Staff

The Smart Zone is located in Leyburn Library on the Main level by the entrance nearest the Elrod Commons.  It has the Smart Board Technology and seating in an open area.  During the day reservations are required and are made by contacting the ITS Help Desk at help@wlu.edu or calling extension 4357.

PhoneMail has two access numbers. The number you dial is determined by the last digit of your phone number.

* * *Even numbers dial 8080

* * *Odd numbers dial 8090

1. Dial your PhoneMail direct access number
2. Dial your extension number followed by #. Special Note for Residents Sharing a Room and Phone: Double room residents must add a 1 or a 2 after your extension number while accessing PhoneMail. Names are loaded alphabetically. For example, if Sarah Bailey and Ann Jones share extension 4005, Sarah's PhoneMail box will be 40051 and Ann's will be 40052.
3. Dial your password and press "#".
4. Follow the PhoneMail prompts for options available to you.

   TIP: If you are in a single room and accessing PhoneMail from your own extension, you can simply press # in step 2 above.

Applies To: Faculty, Staff, Students

The charges from your long distance use will be placed on your regular University account as part of the normal billing process. The bill will be sent to the address of record in the Business Office. The detailed call records for each month will be emailed to your W&L email address. A signed telephone contract must be on file with the Telecommunications Office.

Questions regarding your phone bill or any outstanding balance must be directed to the Telecommunications Office within 10 business days after the bill is received.

Applies To: Students

IDENTIFYING YOUR MAILBOX WITH YOUR NAME

1. Access your PhoneMail box
2. Press 8 for Answering Options
3. Press 4 to Record Name (RECORD FIRST AND LAST NAME ONLY)
4. Press 1 to begin recording
5. Press * # when done

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff, Students

If your campus residence is in the dorms, apartments, or sororities, your phone is already installed and ready for use. It is a Rolm 120 digital phone with the following features:

• Single-line digital telephone with 12 special function buttons
• Eight common function buttons (hold, connect, transfer, volume up, volume down, flash, DND, message waiting)
• One button to indicate line is in use
• One-way speaker (you can hear but not speak)
• Two spare buttons to access many other options
• Four-digit dialing on campus
• PhoneMail (Rolm's voice mail)
• Do Not Disturb (DND) feature

If you reside in one of the fraternities, you will need to provide your own phone for your room. Since the phone lines in the fraternities are analog, a normal single line phone like you have at home is all you need (older rotary phones will not work on this system). However, in order to more easily take advantage of some of the system features, it will be beneficial to have a phone that has a "FLASH" button on it, but it is not required.

Applies To: Students

Students who have phone service on the W&L system may obtain their current long distance balance any time through our Telecom Online web page. Log on to http://sunbelt/phonebill/login.jsp/. You will need your long distance authorization code to access your personal information.

Applies To: Students

The phone is a ROLM phone 120.

Applies To: Students

It's Simple - Our rates are exactly what they say the are! You'll find:

• No Monthly Surcharges
• No Federal Fees
• No 911 Charges
• No Taxes
• W&L covers all those "extra" fees you regularly
see on your home telephone bill and keeps the rate structure simple so you know exactly what you are paying. These rates apply to all calls within the United States and require the use of your long distance authorization code.

Applies To: Students

The FLASH function places any call on soft hold so that you can access a feature or dial another party. The soft hold lasts until you hang up or reconnect the call.

If you are not sure whether to FLASH before using a system feature, remember that you must have dial tone before using a feature. So, if you don't have dial tone, FLASH.

As a resident of off-campus housing, you provide your own phone and it is suggested that you use a phone that has a FLASH button since this feature is used to access so many system features. If you do not have a phone with a FLASH button, do the following: Press the switch hook on your phone for one second Listen for a tone followed by the high pitched holding tone

Note: Holding the switch hook down for longer than one second can disconnect your call.

Applies To: Students

PhoneMail has two access numbers.  The number you dial is determined by the last digit of your phone number.

Even numbers dial 458-8080

Odd numbers dial 458-8090

1. Dial your PhoneMail direct access number
2. When PhoneMail answers, dial your on-campus extension umber and then press "#".
3. Dial your password and pres "#".

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff, Students

To change your password:

1. Access your PhoneMail box
2. Press 9 for Mailbox Options
3. Press 3 to Change Your Password
4. Enter your new password then press #
5. Wait for PhoneMail to verify your new password
6. Hang up or press * 7 6 to log off of the system

Applies To: Faculty, Staff, Students

LISTENING TO YOUR PHONEMAIL MESSAGES

1. Access your PhoneMail box
2. Press 3

Applies To: Faculty, Staff, Students

After you listen to a message you can:

Press 6 to delete the message OR

Press 4 to save the message OR

Press 7 3 to replay the message  

Applies To: Faculty, Staff, Students

After saving or deleting a PhoneMail message, you can attach comments to it and forward the message and comments to one or more extensions.  The original message follows your comments.  To forward a message.

      1.     Save (Option 4) or Delete (Option 6) the message
2.     Press 9 to Forward
3.     After you hear the tone, record your comments, which go in front of the message you want to forward
4.     Dial the extension you want to forward the message to
5.     Press # each time you complete dialing an extension
6.     Press # again to send the message through regular delivery

Applies To: Faculty, Staff, Students

#9 7070 hang-up and your light will be flashing

Applies To: Faculty, Staff

##9 hang-up and the light will stop flashing

Applies To: Faculty, Staff

Transfer (XFER)
7070
Extension # (of person you are calling)
Hang-up

Applies To: Faculty, Staff

Placement of outgoing long distance calls requires the use of your personal 7-digit authorization code. Your long distance code will be in you WebAdvisor account . No deposit is required for long distance service. No subscription fee or monthly service fee will be charged for an authorization code.

You are responsible for maintaining the confidentiality of your authorization code and you will be responsible for all calls placed with your authorization code. If your authorization code is lost or stolen, or if for any reason you feel the security of this number has been compromised, immediately contact the W&L Telecommunications Office in person. Because of the serious nature of the loss of an authorization code, if the Telecommunications Office is closed, you should contact University Security immediately at 8999.

Since your telephone service is provided by the University, you may not subscribe to any "residential" long distance plan offered by another long distance carrier. However, you may obtain access to the interstate common carrier of your choice by establishing a calling card account with them and dialing the carrier's "800" access number. You may also reach an alternate carrier by dialing 9 + 1010xxx + 0 + phone number (for example, to access AT&T using this method, you would dial 9 + 1010288 + 0 + phone number). Contact your carrier for their three digit code and rates. Be aware that many advertised calling cards have per call surcharges or monthly fees associated with them, so read the fine print before committing to any of these services. Please remember that your alternate carrier calling card account can't be associated with your W&L phone system telephone number. A substantial service fee will be charged for calls billed back to your W&L telephone number. For more information, contact the Telecommunications Office.

Complaints related to operator services from any carrier may be addressed to: FCC, Common Carrier Bureau Enforcement Division, 2025 M Street NW, Washington DC, 20554.

Applies To: Students

• Because the system offers PhoneMail, call waiting is not available.
• To dial any campus extension, dial only the last four digits.
• On long distance calls, you will be billed for a one minute call if you listen to a ring or   busy signal for 30 seconds or more after completion of dialing.

Applies To: Students

Basic telephone service on the University system has been provided in your room fee. The phone jack in your room is active and will accept a standard home phone or similar device.

The phone service in the fraternity and International house is slightly different from the phone service in the dorms. Dorm phones are on a digital service but our off-campus buildings are on an analog system. Because analog systems do not require a special phone, residents of our off-campus housing provide their own phones and may use any basic home type phone device. The other differences mainly involve the keystrokes necessary to execute various phone system and PhoneMail functions. Please see other items in this section for details.

Applies To: Students

• Answers your telephone automatically and plays your personal greeting to callers
• Accepts and stores voice messages in your PhoneMail mailbox
• Plays back your messages at your convenience
• Allows you to send and receive messages anytime, from anywhere

Applies To: Students

1. Open   WLU Sakai : https://sakai.wlu.edu

2. Click the Login button.

3. Type your guest account login and password, and click Login.

4. Go to the site, click on the site tab. (You will see two or more tabs in a row across the upper part of the screen.)

RECORDING YOUR PERSONAL PHONEMAIL GREETING

1. Access your PhoneMail box
2. Press 8 for Answering Options
3. Press 1 for Change Greeting
4. Press 1 for Regular Greeting
5. Choose 1 (Ring, No Answer Greeting) OR 2 (Busy Greeting)
6. Record Greeting
7. Press * # when you complete the recording

Applies To: Faculty, Staff, Students

To Move Ahead or Back in Your Message:

To skip forward to the next message introduction press * 2

To skip back to the previous message introduction press * 7 2

To replay the entire message press * 7 3

To replay the previous eight seconds of the message press * 7 8

To move ahead eight seconds into the message press * 9 8

Applies To: Faculty, Staff, Students

• Press 1 to record and send an answer to the message sender OR
• Press 70 to call the person who sent you the message OR
• Press 9 to forward the message to another extension OR
• Press # to continue to the next message

Applies To: Faculty, Staff

The PhoneMail system gives you the option of marking a message as “Urgent”.  The recipient receives and indication before listening to the message that the message is urgent.  Urgent messages appear at the beginning of the new message queue.

To Mark a Message as urgent after being answered by PhoneMail Record your message Press *#3 and then hang up.

To Send an Urgent PhoneMail Message without calling the recipient directly:

            1.       Access your PhoneMail box.
2.     Press 1 for Record
3.     Record message and press *#
4.     Enter an extension number and press ##
5.     Press 3 for Special Delivery
6.     Press 3 for Urgent and press #

Applies To: Faculty, Staff

When you become more familiar with the PhoneMail system, you may want to select abbreviated prompts.  To change to abbreviated prompts:

      1.     Access your PhoneMail box
2.     Press 9 for Mailbox Options
3.     Press 2 for Prompt Level
4.     Press 2 for Abbreviated Prompts

Applies To: Faculty, Staff, Students

To add a student:

1. Go to the course site in Sakai
2. Go to Site Info > Add Participants
3. In the top box, add the student's username, eg SmithJ16 (Do not use the complete email address; only the username)
   
4. Continue
5. Select Student
6. Continue
7. Select Send Now if you want the student to receive an email notification that she/he has been added to the site; otherwise select Don't Send
8. Continue
9. Finish

To remove a student from a class:

1. Go to Site Info and scroll down to the list of enrollees
2. Check the box next to his/her name
3. Check the Remove checkbox
4. Click Update Participants

The professor needs to publish the course.

In the course site within Sakai:

1. In the upper left corner of the screen, click on the (Publish Site) button

You can also publish the site this way:

1. Go to Site Info
2. Manage Access
3. Publish Site
4. Update

In the Sakai site, go to:

1. Site Info
2. Edit Tools
3. Select the checkbox by the desired tool(s)
4. Continue
5. Finish

Contact the Information Desk in Leyburn Library at extension 4357 for basic Sakai questions.

For more in-depth Sakai questions or for training on any of the tools in Sakai please submit a request to help@wlu.edu with the details.

Applies To: Faculty, Staff

By default, Sakai course sites are unpublished, which means that students will not be able to access a site until it is published by the instructor. 

To publish your site, click on Site Info, then Manage Access. Tick the box next to "Publish Site." Now click Update. 

Applies To: Faculty

1.Find the folder you want to move (in the Resources area of the course)

2.      From the Actions menu choose Move.

3.      Click on the “Show other sites” link in the bottom gray bar.

4.      Choose “Paste moved items” from the Action dropdown menu next to the folder where you’d to move the items.

5.      You can also click on the plus sign next to a folder to drill down into that folder and choose a folder within that folder.

Applies To: Faculty, Students

Your telephone service which includes PhoneMail upon request, a voice mail service that enables you to record a personal greeting of up to three minutes in length and accept up to ten, 3-minute messages. Your phone line will be programmed to forward automatically to PhoneMail if you do not answer after four rings or if your line is busy. The message waiting light on your phone will flash whenever you have received a message. You should retrieve and delete messages as often as possible.

By using the access phone number to PhoneMail and your personalized password, you will be able to retrieve messages from any touch-tone phone.

Your greeting will be your own personalized message that may be changed at any time from any phone.

Voice mailboxes are confidential and are accessible only to the individual via a password.
The PhoneMail box owner should erase all messages at the end of the school year. The PhoneMail system will be purged of all messages 24 hours after the final day of spring term exams.

Applies To: Students

• You will be billed for unanswered long distance calls if you listen to a ring or busy signal for 30 seconds or more (approximately 4 rings) after completion of dialing. You will be charged for a one minute call. Credit will not be issued for these calls.
• Students must not bill calls directly to their residence hall telephone number (i.e., accepting collect calls and third party calls). The cost of the call plus a handling fee of $20.00 will be charged to the extension to which the call has been billed.
• University telephones must not be removed from their assigned locations. The ROLM-phone will not work with any other system. The actual cost to replace a missing phone or phones damaged beyond repair will be charged to resident of the room. Phones will not be replaced until a report has been filed with the Telecommunications Office.
• If you damage or deface your phone, a charge for damages, time, and materials will be made against your account for any repairs (usually a minimum of $50).
• Students must keep the phones plugged in at all times. If a phone is detected unplugged, a $5.00 fee will be charged. Unplugged phones create problems for our system. The Do Not Disturb (DND) feature has been provided to help you avoid this fee.
• Be aware that some 800 number calls convert to toll calls (900 number). If you connect with one of these numbers, the cost of the call will be passed along to you. Direct dialing of 900 number services is blocked in our system.
• If your authorization code is lost or stolen, or if for any reason you feel the security of this number has been compromised, immediately contact W&L's Telecommunications Office in person. You will be responsible for all calls made prior to your notification in person. Because of the serious nature of the loss of an authorization code, if the Telecommunications Office is closed, you should contact University Security immediately.

Applies To: Students

If you need to print out your results from a Sakai evaluation from Tests & Quizzes, here is how to do it.

1. Click on Tests & Quizzes ana navigate to Published Assessments tab.
2. Choose “Scores” from Select Action button next to evaluation
3. Choose “Statistics” from gray top menu; this opens Sakai’s report panel
4. Right click in report frame and select “This Frame -> Print Frame…” This will print out the entire report.
5. You can also export results to an Excel spreadsheet. Choose “Export” from top gray menu to do this.
6. In the exported file, individual students are listed by row. Questions are listed by column.

Applies To: Faculty, Staff, Students

You can use the Futrue Delivery function of VoiceMail to leave someon (yourself included) a message about important future appointments.  At the time you decide, the message will be placed in the proper PhoneMail box.

1.  Acces you PhoneMail box.
2.  Press 1 for Record
3.  Record message and press *#
4.  Enter an extension number (your own if this message is for you) and pres ##
5.  Press 3 for Special Delivery
6.  Press 4 for Future Delivery and press ##
7.  Press 1 for One-Time Delivery
8.  Press the appropriate numbers for the Month and press ##
9.  Press the appropriate numbers for the Date and press ##
10. Press the appropriate numbers for the Time and press ##
11. Choose 1 for AM or 2 for PM and press  #
12. Press # to say that the schedule is correct
13. Press # to complete the operation

Applies To: Faculty, Staff, Students

PhoneMail allow you to send a single message to a list of extensions through the Pesonal Distribution List feature. You are limited to 10 extensions per Distribution List and you may have up to 5 different lists. Use the following instructions to create a Distribution List and to send a message.

Access your PhoneMail box Press 9 (mailbox options) Press 1 (distribution lists) Press 1 (create) (PhoneMail will assign a D-List number) When prompted, enter the extension of the first person you want on the list and press # Repeat previous step for other entries (up to 10) Press # when you complete your entries Hang up

Be sure to write down the number of your distrubtion list along with the extensions included in that list.

To send a Message to a Distribution List(s): Access your PhoneMail box Press 1 (record) When prompted, record your message then press * #. Dial the D-List number and press # Repeat previous step for additional D-Lists Press # when done.

Applies To: Students

In the new site:

1. Go to Site Info
2. Click on Import from Site
3. Select the course that contains the content you want to import
4. Click on the content areas you want to bring over (eg, Tests & Quizzes, Resources)
5. Click Continue, then Finished.

Applies To: Faculty

Applies To: Faculty, Staff

Search the feature and the Rolm.  So you would search the key words of hold and Rolm to get your answer.

Applies To: Students

Go to Site Info > Import from Site, then choose the third option, which is "I would like to merge my user(s)".

In the next screen, check the box of the site that contains the students you want to import.

If you log into Sakai, enter the "Sakai Help at W&L" site, click on "Tegrity Screencasts", there is a screencast that shows this process titled "Merging Enrollments".

Applies To: Faculty

1. In the destination site, click on Site Info.
2. Click Import from Site.
3. Click I would like to merge my data
4. Check the box next to the course that has the content you want to copy.
5. Click Continue.
6. Choose the appropriate content area (Announcements, Assignments, Resources)
7. Click Finish

All of the content from that particular area will now reside in the destination site. Note that in order to import content into a particular area, that area must be added as a tool into the destination site. For example, if you'd like to import a quiz into the destination site, the Tests & Quizzes tool must be added to the destination site for it to appear.

Applies To: Faculty

Yes you can. In the course site, go to Site Info > Add Participants.

Outside participants need to be added to the second box "Non-official Particpants". Enter the full email address of the participant and that person will be sent an e-mail with their username (full email address) and password (generated by Sakai.)

Applies To: Faculty

1.     If that is the folder you want, you can move it or copy it to the new location by going to the Resources section, check the checkbox next to the folder name, and choose Copy or Move from the Actions menu.

2.     After you’ve clicked on Copy or Move, you need to select the “Show Other Sites” link at the bottom of the screen.

3.     Browse to the site where you’d like to copy or move your folder.  Click the checkbox next to the folder where you want the links folder to go (Probably the top level Resources folder) and select Paste Copied Items from the Actions Menu.

See the screen shots in the Resources Document

Applies To: Faculty, Staff

Add the forum tool
Create a forum which students don't see
Add topics which students do see
Check by clicking drop done view as 'student'
You will see what they will see live

Applies To: Faculty, Staff

Check your Delivery Dates and the time of day. 

Sakai allows you to set both the date and the time-- down to the second-- when your assessment will become available. Because it uses by default the time that you publish the assessment, you might find that the time is later than you expected. 

Applies To: Faculty, Staff, Students

When you add a W&L student, faculty or staff member to a Sakai site (Site Info > Add Participants) add the USERNAME ONLY in the top box for Official Participants. If you use the entire e-mail address, Sakai creates a guest account instead of using the regular account that's already there, so the regular account won't see the website.

Please call the Information desk at extension 4357 if you still need assistance.

You can move or copy multiple files all at once:

1.      Go to the Resources area of the course with the files that you want to move or copy.

2.      To the left of each folder and file is a checkbox. Check the checkbox for every file you want to move.

3.      Look at the top of the list, just above the top gray bar. You should see 3 links: Copy, Remove and Move.

4.      Click on the Move or Copy link.

5.      Click on the Show Other Sites link.

6.      Select the appropriate folder from the list.

Applies To: Faculty, Students

Add the discussion forum tool to the site.

Allow new threads and allow attachments.

Have the students create a thread, post their assignments as attachments and then have three other students post replies to those threads. If a student goes in and sees that a particular paper already has three replies, then she or he needs to look at another paper. I don’t think there’s a way you can enforce this automatically, you just have to tell the students to pay attention.

If you look at the times submitted for the replies, you’ll be able to see who did the first three replies.

Applies To: Faculty, Staff

There are two possible causes:

1. Make sure that you have published the site. (Site Info > Manage Access > Publish Site)

2. Add the participant to the site as a NON-OFFICIAL site participant. In the course site, go to Site Info > Add Participants and add the user's full e-mail address in the SECOND box for NON-OFFICIAL participants.

Applies To: Faculty

The current recommended service is with Verizon.

You can view your phone bill detail  online using your Long Distance Authorization Code. Access to your bill by clicking on the following link:

Long Distance Account

Applies To: Students

You may choose to participate in our optional "bulk buy" rate plan or simply use our standard rate plan for your long distance calls. Both plans are detailed below. If you do not choose to participate in the optional rate plan, any calls made with your W&L long distance authorization code will be billed according to the standard rate plan.

Applies To: Students

9¢ per minute - Monday through Friday, 7 pm to 7 am & all day Saturday and Sunday, for calls within the U.S. 25¢ per minute - Monday through Friday, 7am to 7 pm, for calls within the U.S.

Applies To: Students

Plan #1 was built with the average caller in mind. We will bill you a basic charge of $22.50 each month for 250 minutes of long distance calls within the U.S. That's 9 cents per minute. Continue to use our system beyond the 250 minutes in each billing period at the same low price of 9 cents per minute. Use these minutes to call anytime of the day or night to anywhere in the U.S. Minutes not used during a billing period will not be carried over. International calls are not eligible for this plan.

Plan #2 is for the heavy user and has our lowest per minute rate. We will bill you a basic charge of $35 each month for 500 minutes of long distance calls within the U.S. That's 7 cents per minute. continue to use our system beyond the 500 minutes each billing period at the same low price of 7 cents per minute. Use these minutes to call anytime of the day or night to anywhere in the U.S. Minutes not used during a billing period will not be carried over. International calls are not eligible for this plan.

Applies To: Students

W&L’s system is linked directly to the area Emergency 911 notification system. 911 should only be used in life threatening situations. Minor emergency calls should be placed to University Security at 8999 from any W&L extension. You may place a call to E-911 by dialing 9+911. In most cases, the E-911 dispatcher will see the phone number you are dialing from and your location on their dispatch screen.

If you accidentally dial 911, please don’t hang up. Simply identify yourself and tell them there is no emergency at your location. There are cases when 911 is accidentally dialed, especially on international calls which require a 9-0-11 prefix or when using a fax machine. If you hang up, the 911 dispatcher is obligated to pursue the call to try to determine if there is an actual emergency.

Be sure to dial carefully. If you unintentionally contact a 911 dispatcher, please explain your mistake to them and you will have played an important role in making the system work properly (and you won’t be responsible for emergency crews rolling up to your dorm on a false alarm).

Applies To: Students

Telephone numbers for students who have phone service from the University will not appear in the local Lexington telephone directory, however, it will automatically be listed in the University telephone directories.

Applies To: Students

The following instructions will help you complete your calls on the W&L phone system:

To Call Another W&L Phone Extension:

Dial the last four digits

To Call a Local Number Off Campus:

Dial 9, wait for dial tone and dial the seven digit number

Local exchanges include: 258-Glasgow; 261, 264-Buena Vista; 291-Natural Bridge; 348-Brownsburg; 458, 460, 461, 462, 463, 464-Lexington.

To Call Long Distance (Direct Dial):

Authorization codes are required for long distance service. Dial 9 + 1 + (area code) + (phone number), wait for double beep, + (authorization code).

To Call Long Distance (Calling Card):

You may use a calling card to access the long distance carrier of your choice by following the instructions listed earlier in this handbook under “Long Distance Service.”

To Make International Calls

Dial 9 + 011 + (country code) + (city routing) + (local phone number), wait for double beep + (authorization code). Please be very careful when dialing international calls. Misdialing the initial digits can result in an inadvertent call to Emergency 911 services.

To Make Local or Long Distance Directory Assistance Calls:

Dial 9 + 1 + (area code) + 555-1212, wait for double beep, + (authorization code). The charge for this call is the prevailing rate at the time.

900 calls and 411 directory assistance calls are blocked.

Applies To: Students

1. Pay your bill on time.
2. When calling long distance, do not let a phone ring for more than 30 seconds (approximately 4 rings). This is especially important when making international calls.
3. Do not accept collect or third party calls.
4. Do not place 800 number calls that convert to toll calls.
5. Do not share your authorization code.
6. Do not damage or deface any part of a phone provided by the University.

Applies To: Students

All on-campus student phones are installed and ready for use. The phone is a ROLM phone 120 with the following features:

• Single-line digital telephone with 12 special function buttons
• Eight common function buttons (hold, connect, transfer, volume up, volume down, flash, DND, message waiting)
• One button to indicate line is in use
• One-way speaker (you can hear but not speak)
• Two spare buttons to access many other options
• Four-digit dialing on campus
• PhoneMail (Rolm's voice mail)
• Do Not Disturb (DND) feature

Applies To: Students

The University's long distance carrier is BTI. If you elect not to use the University's system, you will need to acquire a calling card from the carrier of your choice for the placement of long distance calls. Access to alternate carriers is available through the W&L system by dialing the carriers "800" access numbers. You may also reach an alternate carrier by dialing 9 + 1010xxx + 0 + phone number (for example, to access AT&T using this method you would dial 9 + 1010288 + 0 + phone number). Contact your carrier for their three digit code and rates.

Washington and Lee University does not charge residents for the alternate carrier access described above. You must have an existing calling/credit card arrangement with the alternate carrier and must not associate that account with your local number nor allow charges to be billed to your local number. A substantial service fee will be assessed for all calls billed back to W&L numbers.

If you find that you cannot dial the alternate carrier of your choice from within the W&L system, please contact the Telecommunications Office. telcom@wlu.edu

Applies To: Students

du Pont 104 (Sympodium)

Leyburn M47 (Sympodium)

Leyburn Smart Zone (Smart Board) (Contact the Information Desk at 4357 to reserve)

Newcomb 116 (Wide-Screen Sympodium)

Newcomb 122 (Wide-Screen Sympodium)

Parmly 313 (Smart Board, Biology Department Lab)

Payne 201 (Wide-Screen Sympodium)

Red House (Smart Board)

Science Addition G14 (Sympodium)

Science Addition 114 (Sympodium)

Science Addition 214 (Sympodium)

Tucker 402 (Smart Board)

The conference phone can be checked out by students and staff from the Information desk.  The student check out is 4 hours.  The staff check out is 24 hours.

You can currently use rooms 40, 41, and 47.

To upload an poster to Sakai: 

Login

Go to "My Workspace" 

Select "Membership"

Select "Poster Printing Drop Box"

Go to the folder with your name and click "Add" and "Upload Files.")

Contact Brandon (bucyb@wlu.edu) or Elizabeth (teaffe@wlu.edu) for questions.                     

Thanks, eat

Currently you plug the phone both phone and power cord into the wall.

You plug the phone cord and the power into the center of the table.  Use the adaptor for the power cord.

You plug the phone cord and power into the wall jack located behind the podium.

A Conference Calls allow up to eight parties in a conversation.

To set up a conference call:

1. Get the first party on the line

2. Press the FLASH button (The FLASH button just puts the first party on a soft hold.On the Soundstation2 conference phone, use the button with the 3 people icon on it)

3. Dial next extension number or key in 9 and dial an outside number

4. Inform the called party that this is a conference call

5. Press the CONF button or Key in FLASH * 4 to connect all parties.

6. If you have more participants, repeat steps 2,3 and 5 until you have reached all parties.

To Reconnect to the conference if a called party refuses the conference, is busy, or does not answer:
Press CONNECT (Phone) button
To Drop Last Party You Added to the Conference
Press FLASH
Press * * 4

A conference call allows up to eight parties in a conversation.

Macintosh users should always use the (Mozilla) Firefox browser when working in Sakai.

In the Sakai site:

1. Go to Gradebook

2. All grades (it's in the light gray bar near the top of the screen)

3. Export Gradebook (a button to the right of the screen)

Applies To: Faculty

ITS will assist staff and faculty members who have iOS, Android, and Blackberry devices set up phones to receive email on their devices.

Some faculty and staff may be eligible to receive a subsidy from the University for business use of a cell phone; please complete this form to request the subsidy.

Applies To: Faculty, Staff

Open up the Tegrity link from Sakai
Open the Session List and click the session you want to send
At the bottom you will see an Actions drop down menu (if not maximize the window)
Under Class Actions Click Get Class Link

Note ** UNCHECK the "Do not allow anonymous user ..." box
If you don’t the user will HAVE to log into Sakai

Copy the URL and send via e-mail to TRUSTED user

1. You can use the Course Distribution Lists that are available in the Global Address List (GAL) in Outlook or Entourage. The courses are listed alphabetically by discipline. The format is Chem 106_01 Spring 2009-10.
2. In Sakai, you can use the Announcements tool to send e-mails. Choose High Priority to send e-mail to all participants of the site.
3. In Sakai, use the EMail Archive tool. You will have to add the EMail Archive tool in the Site Info > Edit Tools screen.
4. In Sakai, use the Mailtool too. You will have to add the Mailtool tool in the Site Info > Edit Tools screen. Note: The Mailtool has been deprecated by the Sakai Foundation. The tool is no longer supported and may not be included in future releases.

These instructions provide a general map for configuring your account. If your Android menues offer you different choices than those decribed below try to pick the closest match.

1. Go to Settings
2. Choose "Accounts & Sync"
3. Remove any non-functioning accounts
4. Choose "Add Account"
5. Choose "Exchange and Active Sync"
6. Choose "Manual Setup"
7. Enter your email address
8. Enter "owa.wlu.edu" as your Server address
9. Enter "ad" as your Domain
10. Enter your username as "ad.wlu.edu\username" and password
11. Check the  "This server requires an encrypted SSL connection." Box.
12. Choose "Next"
13. Select the items you wish to sync. 
14. Choose "Finish Setup"
15. At this point you will be asked to accept the security policy and set a PIN if you do not have one.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Sakai is the LMS (Learning Management System) at Washington and Lee University. The web address is http://sakai.wlu.edu

If you have a Mobile device connected to W&L email (Outlook)  and it has been lost or stolen  you will need to do the following ASAP:

1. Login to Outlook Web Access (owa.wlu.edu for faculty/staff or mail.wlu.edu for students)
2. Put in your user name and password
3. Go to Options (this is located in the upper right)
4. On the left of page click on Mobile Devices
5. Select the device that you have lost
6. You may choose to wipe the device to remove all of the emails from it remotely
7. Delete the device from the list
8. Click Save

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff

Applies To: Faculty, Staff

In a web browser, go to go.wlu.edu/webadvisor

Point your Web browser to go.wlu.edu/fax.

1. Go to myvi.wlu.edu and authenticate. If it the first time you will be asked to install the Citrix client.

2. Choose a virtual desktop

3. Go to Computer (My Computer on Windows XP) and you should see the L: drive listed.

If you would like instructions for mapping a network drive on your computer, please send an email with your request to help@wlu.edu or call the Information Desk at extension 4357.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

The six on the top row and the two on the bottom row starting from the left side are programable BLF keys.

The four on the bottom row starting from the right side are the speed dial keys.

Applies To: Faculty, Staff

No, the Chat 150 Microphone is NOT a speakerphone for a regular telephone line.

Go to Settings > Wireless Controls > Turn on WiFi 
 
In WiFi settings select wlusec
 
Enter your username and password

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Once you've logged into Sakai, click on the More Sites tab. Classes that might have been listed in the tabs across the top previously might show now only under the More Sites tab.

For W&L staff and faculty:

1. Open up a web browser (Internet Explorer, Firefox or Safari, for example.)

2. Go to https://owa.wlu.edu (OWA is an acronym for Outlook Web App)

Applies To: Students

Applies To: Students

Word 2007 and Word 2010

1. Start Word, and then open a new blank document.
2. Go to Word Options
   • In Word 2007, click the Office Button, and then click Word Options.
   • In Word 2010, click File, and then click Options.
3. On the Advanced tab, go to the General section.
4. Click to select the Confirm file format conversion on open check box, and then click OK.
5. On the Mailings tab, click Start Mail Merge, and then select Step By Step Mail Merge Wizard.
6. In the Mail Merge task pane, select the type of document that you want to work on, and then click Next.
7. Under Select starting document, select the starting document that you want to use, and then click Next.
8. Under Select recipients, click Use an existing list, and then click Browse.
9. In the Select Data Source dialog box, locate the folder that contains the Excel workbook that you want to use as your data source, select the workbook, and then click Open.
10. In the Confirm Data Source dialog box, click to select the Show all check box. Click MS Excel Worksheets via DDE (*.xls), and then click OK.
11. In the Microsoft Excel dialog box, under Named or cell range, select the cell range or worksheet that contains the data that you want to use, and then click OK.
    NOTE: Your data now appears in the Mail Merge Recipients dialog box with the same formatting that appears in the Excel worksheet.

Outlook 2010/2013

1. While logged in to Outlook select File Tab and click on Account Settings.
2. In the Account Settings window highlight your Microsoft Exchange account and select Change.
3. In the Change E-mail Account window select the More Settings button.
4. Navigate to the Advanced tab.
5. In the ‘Open these additional mailboxes’ display select the ‘Add’ button.
6. Enter the name of the shared mailbox and select OK.
7. Select OK again and close all previous windows.
8. You will now have a permanent link to the shared mailbox in your mail folder hierarchy.
9. NOTE: Sent Items behavior can be configured in one of two ways. To set the Sent Item configuration, login to the shared mailbox through  OWA, Select Options, Settings, and the  Sent Items tab:
1.  
   • Sender: Copies the message to the Sent Items folder of the sender only  (set by default)
   • SenderAndFrom: Copies the message to the Sent Items folder of both the sender and the shared mailbox

Applies To: Faculty, Staff

A shared mailboxes can be accessed via OWA.

To open the shared mailbox, simply add the mailbox email address to the end of your normal OWA URL. Authenticate using your normal domain credentials. (https://owa.wlu.edu/owa/mailboxname@ad.wlu.edu)

Applies To: Staff

https://illiad.wlu.edu/ using W&L network ID and password.

W&L faculty, staff, and students.

Virtual applications and/or desktop may be accessed through the following website. Log in with your W&L network username and password:

http://myvi.wlu.edu

Please log off when you are finished, to free up resources for others.

Applies To: Faculty, Staff, Students

Camtasia Player is on the American Saddlebred image in the Stable.

In your browser, go to http://go.wlu.edu/datareporting

Applies To: Faculty, Staff

You have two options:

http://box.wlu.edu

http://wlu.box.com

In Sakai:

1. Go to the My Workspace tab.
2. Click on Worksite Setup.
3. Click New.
4. Choose Project Site (not Portfolio Site)
5. Click Continue
6. Give your site a title.
7. Click Continue
8. Choose the tools that you would like to use in your project site.
9. Click Continue twice
10. Click Create Site

Through Annie at: http://annie.wlu.edu:80/record=b1694155

Directly at: http://ezproxy.wlu.edu/login?url=http://proquest.safaribooksonline.com/?uicode=washleeu

Safari Books Online provides the full text of books and other print resources, and is available to all W&L faculty, students and staff. Many books on information technology are included in the collection, which includes reference sources from many of the leading technology publishers, including Adobe, Microsoft, O'Reilly, QUE and Sams. Featuring more than 12,000 titles, it covers Office 2010, Adobe graphics applications, Java, Web development, Windows, XML, Linux/Unix, and more.

Applies To: Faculty, Staff

Applies To: Faculty, Staff, Students

Various restrictions apply to the guest wireless network, including limited speed, and restricted access to some web sites, including Facebook. W&L faculty, staff and students can get the best quality connection by registering for W&L's secure wireless network. To do that, point your browser on your wireless device to http://wireless.wlu.edu and follow the directions.

Browse to this location: \\maltiris2\SoftwareDelivery\Symantec\EVault Plug-in and install EVClient_en.msi

If you still are unable to acces your archieved e-mails, call the Information Desk at x4357 or send an email to help@wlu.edu giving us the details and we will contact you.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Students

Outlook 2011

1. While logged in to Outlook select Tools and then Accounts.
2. In the Accounts window highlight your Microsoft Exchange account and select Advanced.
3. In the Advanced window select the Delegates tab.
4. Navigate to the People I am delegate for section.
5. Click Add or + button.
6. In the Select Users search field; enter the name of the shared mailbox and then click then click Find.
7. Highlight the mailbox name then click OK and OK to close all previous windows.
8. You will now have a permanent link to the shared mailbox in your mail folder hierarchy.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff

In Microsoft

At any time, you can change or revoke someone's access permissions to your contacts folders.
1. In Contacts, in the Navigation Pane, right-click the contacts folder for which you want to change permissions.
NOTE If you are using the Navigation Pane in Minimized view, in Contacts, click Navigation Pane, and then right-click the contacts folder for which you want to change access permissions.
2. Click Change Sharing Permissions.
3. Do one of the following:
• Revoke or change access permissions for everyone
1. On the Permissions tab, in the Name box, click Default.
2. Under Permissions, in the Permission Level list, click None to revoke permissions or any of the other options to change permissions.
View descriptions of permission levels
WITH THIS PERMISSION LEVEL (OR ROLE) YOU CAN
Owner Create, read, modify, and delete all items and files, and create subfolders. As the folder owner, you can change the permission levels that other people have for the folder. (Does not apply to delegates.)
Publishing Editor Create, read, modify, and delete all items and files, and create subfolders. (Does not apply to delegates.)
Editor Create, read, modify, and delete all items and files.
Publishing Author Create and read items and files, create subfolders, and modify and delete items and files that you create. (Does not apply to delegates.)
Author Create and read items and files, and modify and delete items and files that you create.
Contributor Create items and files only. The contents of the folder do not appear. (Does not apply to delegates.)
Reviewer Read items and files only.
Custom Perform activities defined by the folder owner. (Does not apply to delegates.)
None You have no permission. You cannot open the folder.
• Revoke or change access permissions for one person
1. On the Permissions tab, in the Name box, click the name of the person whose access permissions you want to change.
2. Under Permissions, in the Permission Level list, click None to revoke permissions or any of the other options to change permissions.
View descriptions of permission levels
WITH THIS PERMISSION LEVEL (OR ROLE) YOU CAN
Owner Create, read, modify, and delete all items and files, and create subfolders. As the folder owner, you can change the permission levels that other people have for the folder. (Does not apply to delegates.)
Publishing Editor Create, read, modify, and delete all items and files, and create subfolders. (Does not apply to delegates.)
Editor Create, read, modify, and delete all items and files.
Publishing Author Create and read items and files, create subfolders, and modify and delete items and files that you create. (Does not apply to delegates.)
Author Create and read items and files, and modify and delete items and files that you create.
Contributor Create items and files only. The contents of the folder do not appear. (Does not apply to delegates.)
Reviewer Read items and files only.
Custom Perform activities defined by the folder owner. (Does not apply to delegates.)
None You have no permission. You cannot open the folder.
3. Repeat step 2 for each person whose access permissions you want to modify.

Applies To: Staff

There are three ways to move a quiz from one Sakai site to another. Here are the three methods:

Method #1

1. Activate the Tests & Quizzes tool in the destination Sakai site.
   (Site Info > Edit Tools > check the box next to "Tests & Quizzes" > Continue > Finish.)
2. In the old site, go into Tests & Quizzes.
3. Below the title of the test you want to export, click on the link that says "Export".
4. In the next screen, make sure that Content Packaging is selected.
5. Click the Export button.
6. Click Download.
7. A browser window will open up with a page full of xml code. Don't worry, that's supposed to happen.
8. In that window, go to File>Save As and save the file to your desktop. It should be named "exportAssessment.xml" That's fine, no need to change the title unless you want to add, "exportAssessmentChem106.xml" for example.
9. Click Save.
10. Go into the destination course.
11. Tests & Quizzes > Assessments
12. Click on the Import button
13. Browse to the exportAssessment.xml file and click Open.
14. Click Import. Depending on the size of the file, this might take a minute.
15.  You should now see the imported test listed under Assessments.

Method #2 (this method will bring in ALL Tests and Quizzes from an old site)

1. Activate the Tests & Quizzes tool in the destination Sakai site.
   (Site Info > Edit Tools > check the box next to "Tests & Quizzes" > Continue > Finish.)
2. In the destination site, go to Site Info > Click on Import from Site > Select "I want to merge my data"
3. Select the old course that has the test, quiz or survey you want to copy.
4. Check the box next to Tests & Quizzes.
5. Click on Import > Finish > Continue
6. Click on Tests & Quizzes in the left side menu to verify that the test, quiz or survey was merged into the site.

Method #3 (This method creates a question pool that you can access in any of your course sites.)

1. In the course site that has the assessment you want to copy, go to Tests & Quizzes.
2. Click on Question Pools
3. Choose Add New Pool.
4. Fill in the Pool Name field and Save
5. Click on Assessments.
6. Click on the name of the Assessment that has the questions you want. You should now see the contents of the assessment.
7. For each part in the assessment, on the right-side menu, click on Copy to Pool.
8. Click on the name of the pool you created for these questions.
9. Now, in the destination site, Create a new assessment. (Tests & Quizzes > Assessments > Fill in the Title field, and click on Create.)
10. In the Add Question drop-down box, select Copy from Question Pool.
11. Click on the name of the pool that has the questions you want.
12. Check the Copy? checkbox on the right side for every question you want to copy to the new assessment.
13. Click Copy at the bottom of the screen.

Applies To: Faculty

Please follow the detailed and illustrated instructions in the Related Resources.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff

This error occurs sometimes when using Firefox or Safari to access your Outlook Live account. Here's how to fix the problem:

In Firefox, go to tools, options, then click the privacy tab and click "remove individual cookies".  Then search for outlook and delete all OUTLOOK.COM cookies.  It should now work.  This method may vary in different browsers and versions of firefox.

In Safari, go Preferences/Security/Show Cookies and delete all OUTLOOK.COM cookies.

*Do NOTdelete ALL Cookies - just the outlook.com ones!*

Applies To: Students

Prospective students access using their personal e-mail address.  The one they used when they applied.  Prospective students create an account (GHQ Applicant Portal "Account Creation" page) and are then sent a 5 digit pin in an email, incuding a link back to the portal where they create a password.

1. Open Internet Explorer.

2. Go up to the gear menu in the upper right and select "Internet Options".

3. On the first page, you'll see a subheading named "Browsing history" and two buttons--hit "Settings".

4. In the new window that pops up, select "View Files" and a file window will open up. There, you can sort by name or size or type (although the name will likely be meaningless, just look for a file of the right type that was edited at or near the right time.

5. DO NOT double-click the file--it will try to open it up from the web, not where you saved it, and may corrupt what you have saved. Select the right file or files, and copy them to the desktop (either drag-and-drop or Ctrl-C and Ctrl-V). There you can open it and resave it properly with the right name.

Applies To: Students

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff, Students

1. Within your IMAP client add a new mail account
2. For the full name field enter the shared mailbox name (or the name you would like to display when an email is sent from this account)
3. For email address enter the SMTP email address for the shared mailbox.
4. For password enter your own password
5. For username enter ad/youraccountname/shared-mailbox-name (ex: ad/smithj/shredmail). Set account type to IMAP
6. Set incoming mail server to owa.wlu.edu
7. Set connection security to SSL/TLS using port 993
8. Set the Outgoing Server to use SMTPA, and use your email/password for authentication.  You will not acutally use this, but most IMAP connection require this step.

Applies To: Faculty, Staff

You will have 30 days after your departure date to move your data out of your W&L Box.com account. At the point that your W&L network account becomes inactive, you will no longer be able to access your W&L Box.com account.

Applies To: Faculty, Staff

Download Qualys BrowserCheck: https://browsercheck.qualys.com/

Install this Mozilla Firefox plug-in. Click on Scan to find the plug-ins that need to be updated. Install the updates. Restart Firefox and log into OWA.

No, emeriti faculty and staff will not retain access to these resources.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Version 40 of Firefox intentionally disables authenticated content embedded in unauthenticated web pages if the page and content are in different domains. 

This can be manually fixed by:

• typing “about:config” in the address bar
• clicking “I’ll be careful, I promise!”
• searching for the Preference Name:  network.auth.allow-subresource-auth
• Click the “1” next to that in the Value column and change to “2”
• click OK. 

Once you refresh the page it will prompt for login. 

If you need access to Colleague, please go to https://managementtools.wlu.edu/AccessRequest/ and request an account. Once the proper approvals are granted, an account will be set up for you. Accounts are set up on an individual basis and they should not be shared with anyone. In most cases, when dealing with course and student information, the Registrar’s office will provide some level of training or guidance on how to access the data you require.

If you already have access to Colleague but cannot remember your login information or have issues accessing the system, go to http://webhelpdesk.wlu.edu and create a ticket under the category of Administrative Data – Colleague Issues/Requests. Once submitted, the ticket will be automatically routed to the appropriate person who can help you resolve problems.