You cannot edit the information of members of a distribution list, but there is a workaround:

In Outlook on a PC:

1. Click on Contacts
2. Click the New button to create a new Contact
3. Fill out the Contact information
4. Click on Save to save the contact
5. In the File menu, choose File > New > Folder
6. Name the folder (My Study Abroad Students, for example)
7. This folder should now appear in the left menu at the very top under "My Contacts"
8. Now you can click and drag the newly created contact into the folder.
9. Repeat these steps for all the Contacts you want to add to the folder

The maximum number of names that you can include in a distribution list depends on the size of the contact files (for each contact) themselves. There are no hard and fast rules but in general, a distribution list can contain between 50-70 names and e-mail addresses.

1. Open the distribution list (double-click on the list.)

2. Click on Forward Group.

3. Choose As an Outlook Contact.

4. Send the email to the recipient.

For the recipient:

1. Open the email.

2. Click on the email attachment and drag it to the Contacts button on the left side of the Outlook window. Now when you look at your contacts, you should see the distribution list.

Applies To: Faculty, Staff

There are two ways to share a Distribution List in Outlook 2007:

METHOD #1:

1.       Open the Distribution List.

2.       Right-click on the name of the distribution list.

3.       Click on Send Full Contact.

4.    Choose In Outlook Format

METHOD #2 :

1.       Open the distribution list.

2.       In the menu across the top, choose Send > In Outlook Format.

Applies To: Faculty, Staff

Applies to Microsoft Outlook 2007 and 2010

1. Open up a new email message

2. Click on the To... button

3. Click on the down arrow in the box underneath "Address Book"

4. Choose the folder with the contacts you'd like to email (if your personal contact folder is not listed see "How do I make my contacts folder an Address Book?")

5. Select the first name in the list, hold down the shift key, select the last name on the list, click on the To: button again.

6. All of the names should now be in the To: field of the email message. Click OK.

7. Compose and send your message.

Applies To: Faculty, Staff

There's not a direct way from the file menu, but you can do the following to save that group as a distribution list:

1. In the e-mail message you want to copy the names from, highlight the names in the To or Cc box.

2. Right-click and select Copy.

3. On the File menu, click on the down arrow next to NEW, and then select Distribution List.

4.  In the "Name" box, type a name for the distribution list.

5. Click "Select Members".

6. In the Members field, right-click, choose "Paste" and then OK. 

7. Click the "Save and Close" button to create the distribution list.

The first time you send to the distribution list, you will have to click CTRL + K, or the "Check Names" button to make the name of the list auto-complete.

1. Open the Global Address List (GAL) by clicking the address book button(looks like a little open book)

2. Search the GAL for the user

3. Highlight the user> right click> click 'Add to Contacts'>

4. At this point you can either click 'Save & Close' and then manually move the contact from your default Contacts address book to your custom book OR you can select the Microsoft icon (top left) select 'Move'>'Copy to Folder'>select your custom address book folder>click OK>close the contact window without saving.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

When searching the Global Address List (GAL), click on the Advanced Find link. This allows you to enter search criteria in one or more fields including Department and Title.  

Note that the search has to match starting with the first word. Searching on "Library" in the Department field does not work because the department name is "University Library".

This advanced find capability is not available for personal contact lists/address books. With these, though, in your Contacts view you can display the Department column and sort by that.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

If you did in error it should be in your trash and then you just drag and drop it back into contacts.

If some time has passed follow these steps from Microsoft

1. With Outlook 2010 open click the File Ribbon tab then click the Options button. 
2. Click Customize Ribbon
3. On the right-hand side add a New Group under the Folder main tab. You can rename it after it is created.
4. Change the “Choose commands from:” to All Commands. Scroll down and select the “Recover Deleted Items…” option then click the “Add > >” button to add this option to your newly created custom group OK.
5. You will now see your new group and the Recover Deleted Items icon in the Folder tab on all folders.
6. If you were to click the button you will see that you have access to any purged/shift-deleted items from that folder.
7. If you use the recover option you will see that your item has now been returned.

In the Outlook 2010

In Contacts, on the Home tab, in the New group, click New Contact Group.

In the "Name" box, type in the name of the Distribution List, i.e., "Committee Members".

On the Contact Group tab, in the Members group, click Add Members, and then click From Outlook Contacts, From Address Book or New Email Contact

1. If you are adding a new email contact, enter the information for the person in the Add New Member dialog box.

If you are adding a member from Outlook Contacts or an Address Book, do the following:

1. In the Address Book drop-down list, click the address book that contains the email addresses that you want to include in your Contact Group.
2. In the list of names, click the names that you want, and then click Members. You can add names from different address books to the same Contact Group.

1. Do this for each person whom you want to add to the Contact Group, and then click OK
2. Click Save & Close in the top left.

The Contact Group is saved in your Contacts folder under the name that you give it.

From Microsoft

The default Contacts folder in Outlook is created in each Outlook profile. This folder cannot be renamed or deleted. You can create additional contacts folders and these folders can be renamed or deleted. This section includes instructions to share contacts folders that you create.

1. In Contacts, in the Navigation Pane, right-click the contacts folder that you want to share.
NOTE If you are using the Navigation Pane in Minimized view, in Contacts, click Navigation Pane, and then right-click the contacts folder that you want to share.
2. Click Share .
3. In the To box of the sharing invitation, enter the name of the recipient.
4. If you want to, change the Subject.
5. If you want to, grant permissions to the recipient to change your contact items by selecting the Recipient can add, edit, and delete items in this contacts folder check box.
6. In the message body, type any information that you want to include.
7. Click Send.
8. Review the confirmation dialog box, and then, if correct, click OK.

Applies To: Staff

From Microsoft

The default Contacts folder in Outlook is created in each Outlook profile. This folder cannot be renamed or deleted.
1. In Contacts, in the Navigation Pane, click Share My Contacts folder.
NOTE If you are using the Navigation Pane in Minimized view, in Contacts, click Navigation Pane, and then click Share My Contacts folder.
2. In the To box, enter the name of the recipient for the sharing invitation message.
3. If you want to, you can change the Subject.
4. If you want to, request permission to view the recipient's default Contacts folder. To do so, select the Request permission to view recipient's Contacts folder check box.
NOTE If you want to request access to a contacts folder other than the default Contacts folder, you must send an e-mail message asking for permissions to that particular folder. This option only requests access to the recipient's default Contacts folder.
5. In the message body, type any information that you want to include.
6. Click Send.
7. Review the confirmation dialog box, and then if correct, click OK.

Applies To: Staff

In Microsoft

At any time, you can change or revoke someone's access permissions to your contacts folders.
1. In Contacts, in the Navigation Pane, right-click the contacts folder for which you want to change permissions.
NOTE If you are using the Navigation Pane in Minimized view, in Contacts, click Navigation Pane, and then right-click the contacts folder for which you want to change access permissions.
2. Click Change Sharing Permissions.
3. Do one of the following:
• Revoke or change access permissions for everyone
1. On the Permissions tab, in the Name box, click Default.
2. Under Permissions, in the Permission Level list, click None to revoke permissions or any of the other options to change permissions.
View descriptions of permission levels
WITH THIS PERMISSION LEVEL (OR ROLE) YOU CAN
Owner Create, read, modify, and delete all items and files, and create subfolders. As the folder owner, you can change the permission levels that other people have for the folder. (Does not apply to delegates.)
Publishing Editor Create, read, modify, and delete all items and files, and create subfolders. (Does not apply to delegates.)
Editor Create, read, modify, and delete all items and files.
Publishing Author Create and read items and files, create subfolders, and modify and delete items and files that you create. (Does not apply to delegates.)
Author Create and read items and files, and modify and delete items and files that you create.
Contributor Create items and files only. The contents of the folder do not appear. (Does not apply to delegates.)
Reviewer Read items and files only.
Custom Perform activities defined by the folder owner. (Does not apply to delegates.)
None You have no permission. You cannot open the folder.
• Revoke or change access permissions for one person
1. On the Permissions tab, in the Name box, click the name of the person whose access permissions you want to change.
2. Under Permissions, in the Permission Level list, click None to revoke permissions or any of the other options to change permissions.
View descriptions of permission levels
WITH THIS PERMISSION LEVEL (OR ROLE) YOU CAN
Owner Create, read, modify, and delete all items and files, and create subfolders. As the folder owner, you can change the permission levels that other people have for the folder. (Does not apply to delegates.)
Publishing Editor Create, read, modify, and delete all items and files, and create subfolders. (Does not apply to delegates.)
Editor Create, read, modify, and delete all items and files.
Publishing Author Create and read items and files, create subfolders, and modify and delete items and files that you create. (Does not apply to delegates.)
Author Create and read items and files, and modify and delete items and files that you create.
Contributor Create items and files only. The contents of the folder do not appear. (Does not apply to delegates.)
Reviewer Read items and files only.
Custom Perform activities defined by the folder owner. (Does not apply to delegates.)
None You have no permission. You cannot open the folder.
3. Repeat step 2 for each person whose access permissions you want to modify.

Applies To: Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Fix: 

     • When in the Contact Folder open the distribution list so that you can see the members.
     • Click on Update Now in the tool bar
     • Click Save & Close

To check that all members will be sent to, create a new message and place the distribution list in the To field, then expand the distribution list and check that all names are listed.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Deleted contacts and distribution lists end up in the Deleted Items folder but the Deleted Items folder is normally sorted by the date the item was received. Because of this, deleted contacts and distribution lists are not easily found.

To easily find the deleted contacts and distributions lists start by opening the Deleted Items folder. Point the mouse at the column header that says "Arrange By". Click on this column header if "Show in Groups" does not have a check mark by it then select it. Next click "Arrange By" again and select "Type". Now the items are sorted by type, and you can hide all of a given type by clicking the triangle icon at the left of the type name. When you hide the other types, it will be easy to find any deleted contacts. Click on the triangle icon at left of the Contacts header if you don't see the individual deleted contacts. Then find the lost one and drag it back into your Contacts folder.

To return the Deleted Items folder to the default view click the "Arrange By" header and select "Date". Click again to disable "Show in Groups" if you would not liked them grouped.

PhoneMail allow you to send a single message to a list of extensions through the Pesonal Distribution List feature. You are limited to 10 extensions per Distribution List and you may have up to 5 different lists. Use the following instructions to create a Distribution List and to send a message.

Access your PhoneMail box Press 9 (mailbox options) Press 1 (distribution lists) Press 1 (create) (PhoneMail will assign a D-List number) When prompted, enter the extension of the first person you want on the list and press # Repeat previous step for other entries (up to 10) Press # when you complete your entries Hang up

Be sure to write down the number of your distrubtion list along with the extensions included in that list.

To send a Message to a Distribution List(s): Access your PhoneMail box Press 1 (record) When prompted, record your message then press * #. Dial the D-List number and press # Repeat previous step for additional D-Lists Press # when done.

Applies To: Students

MAJORDOMO LIST ADMINISTRATION

Mail the following commands to "majordomo@wlu.edu".
The Subject is ignored by majordomo.
Arguments in the []'s are optional. Arguments in italics should be replaced by the actual values.

Instructions For List Users

1. Log into http:owa.wlu.edu using Internet Explorer you have to use IE on a windows computer to get the full version, not the light version.
2. Go to "Options" in the upper right hand corner of the window.
3. Choose "Rules" on the menu on the left.
4. Choose "New Rule"
5. Create a rule with the conditions that
6. Choose "When my name is" --- check "in the TO or CC Box.
7. Under "Do the following" Choose "Forward Message to people or distribution list"
8. Then click on the little message in the center of the page that says
9.  "Apply this rule after the message arrives with ny name in the To or Cc box forward it to People or distribution list"
10. Click on the people or distribution list link and put the forwarding address in the "To:" section of the message recipients window and click OK.

Applies To: Faculty

We do not provide copies of the address list for two primary reasons. 1 - it becomes a nightmare to troubleshoot issues as more and more out-of-date address lists are in use, 2 - if a machine holding these addresses gets infected with a virus that uses or collects addresses then our whole address list would be compromised.

Applies To: Students

To make a personal contacts folder into an address book that is visible when viewing address books, complete the steps below:

1. In the Navigation Pane, click Contacts.
2. Under My Contacts, right-click the Contacts folder you want to view in the address book, and then click Properties on the shortcut menu.
3. Click the Outlook Address Book tab, and make sure that the Show this folder as an e-mail address book check box is selected. If the check box is unavailable, you need to add the Outlook Address Book to your profile (see instructions below).
4. Click OK.

Now when you open a new message, click the To button, and open the dropdown list of address books, this address book will be listed.

Applies To: Faculty, Staff

• Click on the name of the SharePoint calendar. 
• From the Calendar Tools menu, select Calendar Tools.
• Select Connect to Outlook.
• A warning message from Microosft Outlook appears: 'Connect this SharePoint Calendar to Outlook? You should only connect lists from sources you know and trust.'
• Click on Yes.

This option is only available from Internet Explorer or Mozilla Firefox browsers on a PC.

If you use Chrome on a PC, log into the site using Internet Explorer just long enough to accomplish the desired task.

If you're using a Macintosh, you can use a virtual desktop by going to http://thestable.wlu.edu, selecting an image from the MAIN menu, then logging into the SharePoint site using Internet Explorer.

To add a student:

1. Go to the course site in Sakai
2. Go to Site Info > Add Participants
3. In the top box, add the student's username, eg SmithJ16 (Do not use the complete email address; only the username)
   
4. Continue
5. Select Student
6. Continue
7. Select Send Now if you want the student to receive an email notification that she/he has been added to the site; otherwise select Don't Send
8. Continue
9. Finish

In the Sakai site, go to:

1. Site Info
2. Edit Tools
3. Select the checkbox by the desired tool(s)
4. Continue
5. Finish

Contact the Information Desk in Leyburn Library at extension 4357 for basic Sakai questions.

For more in-depth Sakai questions or for training on any of the tools in Sakai please submit a request to help@wlu.edu with the details.

Applies To: Faculty, Staff

Yes. To publish a personal homepage, follow the follwing steps:

1. In your H: drive, create a new folder named "public_html"
2. Open the properties of the public_html folder
3. Open the Security tab
4. Select the "WWW" user entry
5. Toggle on the "Read/Execute" rights for the WWW user and save
6. Send an email to Jeff Knudson jknudson@wlu.edu requesting that your site be registered with the web servers

Mac users will need to access a Windows computer image at MyVI to complete this proceedure.

Your hompage URL will be in the format: http://home.wlu.edu/~username w

here "username" is your user name.

This site supports only static HTML documents.

Librarian: Dick Grefe (540) 458-8648 grefed@wlu.edu

RECORDING YOUR PERSONAL PHONEMAIL GREETING

1. Access your PhoneMail box
2. Press 8 for Answering Options
3. Press 1 for Change Greeting
4. Press 1 for Regular Greeting
5. Choose 1 (Ring, No Answer Greeting) OR 2 (Busy Greeting)
6. Record Greeting
7. Press * # when you complete the recording

Applies To: Faculty, Staff, Students

You have two options:

http://box.wlu.edu

http://wlu.box.com

Applies To: Faculty, Staff, Students

1. Begin typing the name you wish to remove from the AutoComplete list.

2. Select the unwanted name by using the UP ARROW or DOWN ARROW key.

3. Press DELETE.

Note: When you type the first letter of a name in the To, CC, and BCC boxes, AutoComplete begins to suggest possible matches based on names of whom you have sent an item to before.

In Office PowerPoint 2007, add transitions to slides by doing the following:

1. On the left side of the slide window, in the pane that contains the Outline and Slides tabs, click the Slides tab.
2. Select the slide thumbnail of the first slide in the presentation.
3. Click On the Animations tab at the top, then look for the the Transition To This Slide group, click a slide transition effect that you like.
   

   To see more transition effects, in the Quick Styles list, scroll down.There are several to choose from.

4. To change the slide transition speed between the current slide and the next slide, in the Transition To This Slide group, click the arrow next to Transition Speed, and then select the speed that you like.
5. In the Transition To This Slide group, click Apply to All.

Left click VIEW at the top and select Normal. You need to be in normal view to add notes

1. Move to the slide in which you want to add notes.

2. Look at the bottom for the words “click to add notes”

     Click and drag the notes pane border up for more viewable area

3. Click in the “click to add notes” text box.

4. Enter the notes

5. Press Enter to create new paragraphs if needed.

On your Blackberry, if you just want to see the members of a particular folder and not all of your Contacts:

1. In the Address Book > Click on the Blackberry button > Choose "Filter" from the list

2. You should see the Contacts Folder names you've created.

3. If you select to filter on that folder, you will see only the names in that folder.

4. To undo a filter and see all of your Contacts, repeat the process but uncheck the box in front of the folder name.

Applies To: Faculty, Staff

Applies To: Students

Applies To: Faculty, Staff

Applies To: Students

Adding Phonebook Entries

The RightFax Web Client lets you create a personal phonebook of fax and e-mail addresses. You can add both individual entries and group entries that let you easily send one document to multiple recipients. Phonebook entries can be private or published. Private phonebook entries can be viewed only by you. Published phonebook entries can be viewed by any other RightFax user on the network.

To Create an Individual or Group Phonebook Entry

1. From the Web Client folder view, click the New Fax button. The Create/Edit Document page opens.
2. Under Primary Information, click the Phonebook Search button.
3. Click the New Entry button to create an individual phonebook entry or the New Group button to create a group entry.
4. Enter a name for the entry in the ID box, and check the Published option if you want this phonebook entry to be available to other users on your network.
5. If you are creating an individual entry, complete the addressing boxes. All boxes are optional but you must enter at least one fax number or e-mail address. If you are creating a group entry, type the phonebook IDs you want in the Members box, and press ENTER between each ID you add. Group phonebook entries can only be made from existing phonebook IDs. If you want to add a new fax or e-mail address to a group phonebook entry, you must first make it an individual phonebook entry.
6. When you have completed the addressing information or added all the phonebook IDs you want, click the Save button. The new entry will be immediately added to your personal phonebook.

To Select an Address from Your Phonebook

1. Under Primary Information, click the Phonebook Search button to display all the entries in your personal RightFax phonebook. You can select one phonebook entry per document. If you select a group phonebook entry, the document will be sent to all members of that group.
2. Click the check mark next to the entry to which you want to send the document. This returns you to the Create/Edit Document page with the recipient's addressing information entered under Primary Information. If you selected a group phonebook entry, the phonebook ID will appear in the Name field.

Applies To: Faculty, Staff

Settings > General > Reset > Erase All Content and Settings

You will be asked to confirm two times.

All of your applications, network settings, e-mail information and iTunes account information will be wiped off of the iPad.

Applies To: Faculty, Staff, Students

The Registrar's office maintains a list of classroom spaces here: https://managementtools3.wlu.edu/CourseOfferings/pages/Page6.aspx

Yes you can. In the course site, go to Site Info > Add Participants.

Outside participants need to be added to the second box "Non-official Particpants". Enter the full email address of the participant and that person will be sent an e-mail with their username (full email address) and password (generated by Sakai.)

Applies To: Faculty

If you right click on the files that do not work and look at the Security tab under Properties, the read permissions for the WWW user are missing.  This is the account that the web servers use to read the data.  Missing rights is usually caused by moving files between folders of differing security settings.  Within a volume, the file server does not recalculate rights on a move.  These files may have been dragged from elsewhere in the H: drive, and therefore did not receive the read permissions required.  The easiest way to prevent this is to use copy/paste instead of drag or move, since rights are always re-calculated when a file is created. 

To fix the existing files: 

1.       right click on the public_html folder

2.       select properties

3.       select security

4.       select advanced

5.       check the box “Replace permission entries on all child objects with entries shown here that apply to child objects”

6.       select OK

7.       select OK

This will force all the rights in the public_html folder to be recalculated.

Sometimes you will get a bounce back from an e-mail address that you have used before. Please forward as an attachment the bounce back to mtrimmer@wlu.edu.  If it is determined that there is an invalid address that has gotten into your auto-complete address list you will need to remove the invalid address and manually enter correct address.

To remove the bad address you will need to remove the Name@address.com entry in you auto-complete list (the list of address that come up when you start typing in the To field). To remove the entry start typing “N” in the To field of a new message, use the arrow keys to move up and down the list until Name@address.com is highlighted, and press the Delete key.

After this you can manually type the address once and it will then again be in you auto-complete list, this time with the correct address.

Applies To: Faculty, Staff

In a new message, on the Message Options tab, in the Fields group, click Show Bcc.

1. One of the site owners needs to log into the SharePoint site (Members and Visitors cannot do this.)
2. Site Actions > Site Permissions
3. Select the name of the group to which you want to add the person.
4. Click New in the light gray bar above the list of current group members.
5. Type in or browse the address book for the username.
6. By default, the box is checked for the added person to receive an email with a link to the site. You can also add a personal message if you'd like.
7. Click OK.

There may be multiple user notification/alerts registered for the list.  To delete the extra notifications:

1. on the SharePoint site as an admin, select "Site Actions"
2. select "Site Settings"
3. under "Site Administration" select "User Alerts"
4. select the user to check for duplicate noifications/alerts and select "Update"
5. check the duplicate notifications/alerts
6. select "Delete Selected Alerts"
7. Re-select user to verify duplicate notifications/alerts are gone

http://spam.wlu.edu

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Contact the building coordinator at ext. 5000

Background:

AutoComplete is a feature which displays suggestions for names and email addresses as you begin to type them. These suggestions are possible matches from a list of names and email addresses that you have typed before, known as the AutoComplete name list. The AutoCompletes name list saved as a file on the local machine. 

Possible solutions:

1. Are you using your primary machine?  AutoComplete Lists are saved per machine (locally).  If you are not on your primary machine you will have a different list.
2. Was your machine rebuilt recently?  If so your AutoComplete file may not have been copied over to the new build. In this case you will need to start building a new list.
3. Is AutoComplete turned off? To turn AutoComplete on:
   • go to the File menu
   • click Options
   • select the Mail tab
   • scroll down to 'Send messages' section
   • check the "Use Auto-Complete to suggest names when typing in the To, Cc, and Bcc lines" check box
4. Very rarely a AutoComplete list file gets corrupted and all suggestions disappear. If your new entries are being saved then continue to build your new list with use. If the list remains blank contact the W&L InfoDesk. 

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Create a distribution list by copying names from an Excel chart or received e-mail message.   
  
1.If using Excel copy the column.
2.In the message that you want to copy the names from, select the names in the To or Cc box. 
3.Right-click your selection, and then click Copy on the shortcut menu.
4.In Contacts on the Home ribbon New - Click New Contact Group and Name it.
5.On the Contact Group ribbon Members - Click Add Members and select from Outlook Contacts.
6.At the bottom of the Select Members dialog box, in the Members box, right-click and then click Paste on the shortcut menu. 

Note   A member does not need to be in your Address Book in order to be added to the distribution list. The member's name and e-mail address will be included when you copy and paste from the original e-mail message.

7.Click OK.
8.Click Save & Close.

Not initially.  The Safe Senders list can only be set up by enabling Automatic Email Filtering (Junk Folder) in Outlook Web Access (http://owa.wlu.edu) Once complete you can manage your safe senders list in Outlook 2010 and 2013.

Applies To: Faculty, Staff

Students can download Office products and antivirus from the Student Software Download page.

Employees can download Office products and antivirus from the Employee Software Downloads page. 

Applies To: Students

This occurs if you DOUBLE-click the link instead of using a single click.  The error comes from the second instance conflicting with the first instance.

The IP address of this device will vary based on the location where it is being used. If you need to know the IP address before the time of your conference, the unit will need to be connected to the network in your location prior to the time of your event. An IP address will be automatically assigned and displayed on the screen. You will then need to leave the device hooked to the network to retain that address.

1. Open the folder: \\maltiris2\SoftwareDelivery\Microsoft\Management Tools

2. Open the appropriate folder and install the MMC

3. Select the Windows Start button and search for "Turn Windows Features On" and open the application.

4. Expand Remote Server Administration tools

5. Open Role Administration Tools

6. Open AD DS and AD LDS Tools

7. Open AD DS Tools

8. Check Active Directory Administrative Center

9. Select OK

With PowerPoint 2010, when you have the QuickTime player installed on your computer, you can insert an Apple QuickTime movie (.mov, .mp4) file.

The PowerPoint 2010 64-bit version is not compatible with 32-bit versions of QuickTime or Flash. You must install a 64-bit version of QuickTime or Flash, or a 32-bit version of PowerPoint 2010.

To embed or link to a QuickTime video from your PowerPoint presentation, see Embed a video in your presentation.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Students

A conference call allows up to eight parties in a conversation.

Go to Box.com and create a personal account using a personal email address, such as a gmail or yahoo account. in your W&L Box.com account, add that account as a collaborator on the files you'd like to move. Log into the personal account and download the files that you need to that account.

Applies To: Faculty, Staff