There's not a direct way from the file menu, but you can do the following to save that group as a distribution list:

1. In the e-mail message you want to copy the names from, highlight the names in the To or Cc box.

2. Right-click and select Copy.

3. On the File menu, click on the down arrow next to NEW, and then select Distribution List.

4.  In the "Name" box, type a name for the distribution list.

5. Click "Select Members".

6. In the Members field, right-click, choose "Paste" and then OK. 

7. Click the "Save and Close" button to create the distribution list.

The first time you send to the distribution list, you will have to click CTRL + K, or the "Check Names" button to make the name of the list auto-complete.

The maximum number of names that you can include in a distribution list depends on the size of the contact files (for each contact) themselves. There are no hard and fast rules but in general, a distribution list can contain between 50-70 names and e-mail addresses.

1. Open the distribution list (double-click on the list.)

2. Click on Forward Group.

3. Choose As an Outlook Contact.

4. Send the email to the recipient.

For the recipient:

1. Open the email.

2. Click on the email attachment and drag it to the Contacts button on the left side of the Outlook window. Now when you look at your contacts, you should see the distribution list.

Applies To: Faculty, Staff

There are two ways to share a Distribution List in Outlook 2007:

METHOD #1:

1.       Open the Distribution List.

2.       Right-click on the name of the distribution list.

3.       Click on Send Full Contact.

4.    Choose In Outlook Format

METHOD #2 :

1.       Open the distribution list.

2.       In the menu across the top, choose Send > In Outlook Format.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

You cannot edit the information of members of a distribution list, but there is a workaround:

In Outlook on a PC:

1. Click on Contacts
2. Click the New button to create a new Contact
3. Fill out the Contact information
4. Click on Save to save the contact
5. In the File menu, choose File > New > Folder
6. Name the folder (My Study Abroad Students, for example)
7. This folder should now appear in the left menu at the very top under "My Contacts"
8. Now you can click and drag the newly created contact into the folder.
9. Repeat these steps for all the Contacts you want to add to the folder

Applies To: Faculty, Staff

PhoneMail allow you to send a single message to a list of extensions through the Pesonal Distribution List feature. You are limited to 10 extensions per Distribution List and you may have up to 5 different lists. Use the following instructions to create a Distribution List and to send a message.

Access your PhoneMail box Press 9 (mailbox options) Press 1 (distribution lists) Press 1 (create) (PhoneMail will assign a D-List number) When prompted, enter the extension of the first person you want on the list and press # Repeat previous step for other entries (up to 10) Press # when you complete your entries Hang up

Be sure to write down the number of your distrubtion list along with the extensions included in that list.

To send a Message to a Distribution List(s): Access your PhoneMail box Press 1 (record) When prompted, record your message then press * #. Dial the D-List number and press # Repeat previous step for additional D-Lists Press # when done.

Applies To: Students

Create a distribution list by copying names from an Excel chart or received e-mail message.   
  
1.If using Excel copy the column.
2.In the message that you want to copy the names from, select the names in the To or Cc box. 
3.Right-click your selection, and then click Copy on the shortcut menu.
4.In Contacts on the Home ribbon New - Click New Contact Group and Name it.
5.On the Contact Group ribbon Members - Click Add Members and select from Outlook Contacts.
6.At the bottom of the Select Members dialog box, in the Members box, right-click and then click Paste on the shortcut menu. 

Note   A member does not need to be in your Address Book in order to be added to the distribution list. The member's name and e-mail address will be included when you copy and paste from the original e-mail message.

7.Click OK.
8.Click Save & Close.

1. In Outlook, click on File > Options > Mail.
2. Click on Signatures.
3. Click the New button.
4. Type a name for your signature and click on OK.
5. In Choose Default Signature:
6. Select e-mail signature.
7. Select if you want your signature added to New messages.
8. Select if you want your signature added to Replies/Forwards.
9. In Edit Signature, you have serveral options:  Type your signature, insert a picture, insert your business card, or add an hyperlink.
10. Click on OK to return to your Mail.

Applies To: Faculty, Staff

1. You can use the Course Distribution Lists that are available in the Global Address List (GAL) in Outlook or Entourage. The courses are listed alphabetically by discipline. The format is Chem 106_01 Spring 2009-10.
2. In Sakai, you can use the Announcements tool to send e-mails. Choose High Priority to send e-mail to all participants of the site.
3. In Sakai, use the EMail Archive tool. You will have to add the EMail Archive tool in the Site Info > Edit Tools screen.
4. In Sakai, use the Mailtool too. You will have to add the Mailtool tool in the Site Info > Edit Tools screen. Note: The Mailtool has been deprecated by the Sakai Foundation. The tool is no longer supported and may not be included in future releases.

Mail merges can be done in Word.  If you need assistance please contact the Information Desk at X 4357 or enter a ticket in WebHelpDesk.  See Related Resources if using Word 2010.

Deleted contacts and distribution lists end up in the Deleted Items folder but the Deleted Items folder is normally sorted by the date the item was received. Because of this, deleted contacts and distribution lists are not easily found.

To easily find the deleted contacts and distributions lists start by opening the Deleted Items folder. Point the mouse at the column header that says "Arrange By". Click on this column header if "Show in Groups" does not have a check mark by it then select it. Next click "Arrange By" again and select "Type". Now the items are sorted by type, and you can hide all of a given type by clicking the triangle icon at the left of the type name. When you hide the other types, it will be easy to find any deleted contacts. Click on the triangle icon at left of the Contacts header if you don't see the individual deleted contacts. Then find the lost one and drag it back into your Contacts folder.

To return the Deleted Items folder to the default view click the "Arrange By" header and select "Date". Click again to disable "Show in Groups" if you would not liked them grouped.

Applies To: Students

In Outlook 2007 and domain computers, there is a group policy object in place that prevents caching mode.  If a computer is NOT in the domain OR is using Outlook 2010, then that policy does not apply, and by default, cached mode gets turned on. 

To turn it off, go to File, Account Settings, Account Settings.  Select her name, hit change.  “Use cached exchange mode” should be unchecked.

Restart Outlook

Applies To: Faculty, Staff

Broadcast Mail is a special e-mail message containing urgent or official information from the University. Anyone at W&L can initiate a Campus Notice; only authorized personnel can send Broadcast Mail.

1. Open the Word Document.

2. Click on File in the upper Left hand corner.

3. Click on Save As

4. Choose PDF from the Save as type drop down.

5. Name the file and click save.

The PDF will be created in the same folder as the original word document.

After watching this 5 minute video from Microsoft Online, you’ll be creating your first PowerPoint 2007 presentation.

Microsoft video

1.In the email setup application, on the Email Accounts screen, press the Menu key.

2. Click Add Email Account.

3. Click your email account type. (Other if you do not see exchange)
4. Type your email address and password. Click Next.
5. For most types of email addresses, click POP/IMAP (Most common).

Provide the advanced setup information for your email address.

Click Next.

Applies To: Students

In your e-mail from Care.com there is a statement.

"At Care.com, we do not send unsolicited emails. If you no longer want to receive these emails, please modify your group communication preferences."

Log in and adjust your preferences.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

ON a PC or a Mac

• Forward the email AS AN ATTACHMENT to spam@wlu.edu 

ON a PC only

• In Outlook 2010 or Outlook 2013, use the Junk Button > Report Junk to forward the email. You can get this button by installing the plugin found here: http://www.microsoft.com/en-us/download/details.aspx?id=18275 (If you need assistance, please contact the ITS Information Desk at extension x4357.

Applies To: Faculty, Staff

• Log into RightFax and in the url line of your preferred browser enter go.wlu.edu/fax
• Make sure "Use Windows Authentication" is checked and Click sign in
• Click on the "New Fax" link to get to the Create/Edit Document page.
• Under Primary Information all fields marked with a *red asterisk are required
• Next to "Name," enter the name of the person or department to which you are sending the fax
• Next to "Destination Type" use the default choice, “Fax Number,” to send a fax
• Next to "Destination," type the destination fax number.
  • For on-campus fax numbers, use four digits only.
  • For an off-campus local fax number, dial 9 then the 7 digit number. For example: 95555555.
    • Don’t include hyphens or other non-numeric characters.
  • For an off-campus long distance fax number, dial 9 then 1 and the number. For example: 915555555555.
    • Don’t include hyphens or other non-numeric characters.
• All other “To” fields are optional – complete as needed.
• A cover sheet is automatically included in your fax. Type in any notes for the cover sheet in "Cover Sheet Notes".

In Sakai:

1. Go to the My Workspace tab.
2. Click on Worksite Setup.
3. Click New.
4. Choose Project Site (not Portfolio Site)
5. Click Continue
6. Give your site a title.
7. Click Continue
8. Choose the tools that you would like to use in your project site.
9. Click Continue twice
10. Click Create Site

Applies To: Students

Applies To: Students

Browse to this location: \\maltiris2\SoftwareDelivery\Symantec\EVault Plug-in and install EVClient_en.msi

If you still are unable to acces your archieved e-mails, call the Information Desk at x4357 or send an email to help@wlu.edu giving us the details and we will contact you.

Applies To: Faculty, Staff

In the Outlook 2010

In Contacts, on the Home tab, in the New group, click New Contact Group.

In the "Name" box, type in the name of the Distribution List, i.e., "Committee Members".

On the Contact Group tab, in the Members group, click Add Members, and then click From Outlook Contacts, From Address Book or New Email Contact

1. If you are adding a new email contact, enter the information for the person in the Add New Member dialog box.

If you are adding a member from Outlook Contacts or an Address Book, do the following:

1. In the Address Book drop-down list, click the address book that contains the email addresses that you want to include in your Contact Group.
2. In the list of names, click the names that you want, and then click Members. You can add names from different address books to the same Contact Group.

1. Do this for each person whom you want to add to the Contact Group, and then click OK
2. Click Save & Close in the top left.

The Contact Group is saved in your Contacts folder under the name that you give it.

• In Outlook, open up the message (sent or received).
• In the Message tab at the top of the open E-mail, click on More and select Forward as Attachment.
• Enter the person’s E-mail address to forward the E-mail as an attachment and send.

To Create an envelope:

From the Ribbon, select the Mailings tab.
In the Create section, select the Envelopes button.
Under the Envelopes tab, enter the information for the Delivery address.
Enter the information for the Return adress if necessary.
Click Print to print your envelope.

Print will send your envelope to your default printer.
If you have a laser jet the bypass tray will have a diagram of how to place your envelope.
If you have a BizHub the envelope is loaded in the bypass tray with the side to be printed on facing down and the top towards you.

Applies To: Faculty, Staff

Sometimes you will get a bounce back from an e-mail address that you have used before. Please forward as an attachment the bounce back to mtrimmer@wlu.edu.  If it is determined that there is an invalid address that has gotten into your auto-complete address list you will need to remove the invalid address and manually enter correct address.

To remove the bad address you will need to remove the Name@address.com entry in you auto-complete list (the list of address that come up when you start typing in the To field). To remove the entry start typing “N” in the To field of a new message, use the arrow keys to move up and down the list until Name@address.com is highlighted, and press the Delete key.

After this you can manually type the address once and it will then again be in you auto-complete list, this time with the correct address.

Applies To: Faculty, Staff

Apple has great tutorials on their site.  Please click here to find out more about iWeb.

Technology work request tickets can be created simply by emailing your request to helpdesk@wlu.edu from a W&L email address. Your request will automatically be turned into a request ticket, and you will be sent a ticket confirmation.

You can reply to that email to update the job with further details, or simply send a new email to helpdesk@wlu.edu with the subject line Ticket your ticket number . (E.g. Ticket 12345) and your update in the body of the email.

Applies To: Faculty, Staff, Students

Go to http://www.microsoft.com/en-us/download/details.aspx?id=18275 and download the appropriate plug in for your PC or contact the ITS Information Desk at extension 4357 and ask for someone to help you install it.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Microsoft has now changed the server to outlook.office365.com for mobile/POP/IMAP.

Applies To: Students

We are just starting on these instructions.  Please let us know of additions/corrections.

In Outlook 2011 you need to go to mail preferences and add an exchange account.

User name is full e-mail address with password.

When prompted say always allow.

Server is pod51000.outlook.com

Applies To: Students

This error occurs sometimes when using Firefox or Safari to access your Outlook Live account. Here's how to fix the problem:

In Firefox, go to tools, options, then click the privacy tab and click "remove individual cookies".  Then search for outlook and delete all OUTLOOK.COM cookies.  It should now work.  This method may vary in different browsers and versions of firefox.

In Safari, go Preferences/Security/Show Cookies and delete all OUTLOOK.COM cookies.

*Do NOTdelete ALL Cookies - just the outlook.com ones!*

Applies To: Students

Applies To: Faculty, Staff

In Outlook 2007,  Click File > Options: Other (tab) and check the little box that indicates it will delete messages on Exit.

In Outlook 2010/2013, Click File > Options > Advanced and under "Outlook Start & Exit" check "Empty Deleted Items Folder When Exiting Outlook".

Please view the document on how to retrieve data from a Poll Everywhere polling session after you’ve cleared it. If you have two sections of the same course, you would run the poll for the first section. You would clear the data after you run the poll for the first section, and then run the poll for the second section. If you want to get back to the data from the first section, this is how you would do it.

Open up the Tegrity link from Sakai
Open the Session List and click the session you want to send
At the bottom you will see an Actions drop down menu (if not maximize the window)
Under Class Actions Click Get Class Link

Note ** UNCHECK the "Do not allow anonymous user ..." box
If you don’t the user will HAVE to log into Sakai

Copy the URL and send via e-mail to TRUSTED user

This is from an on-line forum...

Outlook does not download any pictures by default for HTML emails. Now this is nothing new, but what is different is that Outlook 2010 has added another layer of security around the pictures. In 2010 to enable images for HTML:

1. Click on the new "File" tab
2. Click on "Options"
3. Click on "Trust Center"
4. Clicn on "Trust Center Settings"
5. Uncheck the "Don't download pictures automatically in HTML e-mail messages or RSS items" check box
6. Click the OK button
7. Exit Outlook 2010
8. Close all your applications and save your work.
9. Restart the computer.

Applies To: Faculty, Staff

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff

Applies To: Faculty, Staff

1. Open the Global Address List (GAL) by clicking the address book button(looks like a little open book)

2. Search the GAL for the user

3. Highlight the user> right click> click 'Add to Contacts'>

4. At this point you can either click 'Save & Close' and then manually move the contact from your default Contacts address book to your custom book OR you can select the Microsoft icon (top left) select 'Move'>'Copy to Folder'>select your custom address book folder>click OK>close the contact window without saving.

Applies To: Faculty, Staff

We do not provide copies of the address list for two primary reasons. 1 - it becomes a nightmare to troubleshoot issues as more and more out-of-date address lists are in use, 2 - if a machine holding these addresses gets infected with a virus that uses or collects addresses then our whole address list would be compromised.