Author: Flash Floyd

MDID:
1.  On the machine you are installing, create an ImageViewer folder (usually C:\Program Files\ImageViewer), and copy all the files in UCTOOLS\OTHER\MDID\ImageViewer2_PC  into the local ImageViewer folder.  Create a shortcut in Start, All Programs for the new application.
2.  Run the application. After it loads and prompts for a username/password, select "Preferences" in the upper right corner of the application and change two settings: MDID URL should be http://mdid2.wlu.edu ( http://mdid2.wlu.edu/ ), and Local Image Cache Directory can be set to any local folder that the user can access (varies depending on installation).
3. Test ID=biged, password - biged

Artstor:
Found in UCTOOLS\OTHER\ARTSTOR(EK).
1. Open the ZIP file and run executable to install.
2. Open program
3. You may need to click "unblock" on a windows security prompt
4. From menu, Insert, Image Groups from Artstor
5. Authenticate Now prompt - Use the ID=tech1@wlu.edu  PW=artstorinstall
6.  You should see a selection of shows that can be downloaded

1. Open the Word Document.

2. Click on File in the upper Left hand corner.

3. Click on Save As

4. Choose PDF from the Save as type drop down.

5. Name the file and click save.

The PDF will be created in the same folder as the original word document.

After watching this 5 minute video from Microsoft Online, you’ll be creating your first PowerPoint 2007 presentation.

Microsoft video

• Log into RightFax and in the url line of your preferred browser enter go.wlu.edu/fax
• Make sure "Use Windows Authentication" is checked and Click sign in
• Click on the "New Fax" link to get to the Create/Edit Document page.
• Under Primary Information all fields marked with a *red asterisk are required
• Next to "Name," enter the name of the person or department to which you are sending the fax
• Next to "Destination Type" use the default choice, “Fax Number,” to send a fax
• Next to "Destination," type the destination fax number.
  • For on-campus fax numbers, use four digits only.
  • For an off-campus local fax number, dial 9 then the 7 digit number. For example: 95555555.
    • Don’t include hyphens or other non-numeric characters.
  • For an off-campus long distance fax number, dial 9 then 1 and the number. For example: 915555555555.
    • Don’t include hyphens or other non-numeric characters.
• All other “To” fields are optional – complete as needed.
• A cover sheet is automatically included in your fax. Type in any notes for the cover sheet in "Cover Sheet Notes".

Macintosh users should always use the (Mozilla) Firefox browser when working in Sakai.

In Sakai:

1. Go to the My Workspace tab.
2. Click on Worksite Setup.
3. Click New.
4. Choose Project Site (not Portfolio Site)
5. Click Continue
6. Give your site a title.
7. Click Continue
8. Choose the tools that you would like to use in your project site.
9. Click Continue twice
10. Click Create Site

PhoneMail allow you to send a single message to a list of extensions through the Pesonal Distribution List feature. You are limited to 10 extensions per Distribution List and you may have up to 5 different lists. Use the following instructions to create a Distribution List and to send a message.

Access your PhoneMail box Press 9 (mailbox options) Press 1 (distribution lists) Press 1 (create) (PhoneMail will assign a D-List number) When prompted, enter the extension of the first person you want on the list and press # Repeat previous step for other entries (up to 10) Press # when you complete your entries Hang up

Be sure to write down the number of your distrubtion list along with the extensions included in that list.

To send a Message to a Distribution List(s): Access your PhoneMail box Press 1 (record) When prompted, record your message then press * #. Dial the D-List number and press # Repeat previous step for additional D-Lists Press # when done.

Applies To: Students

Applies To: Students

Applies To: Students

In the Outlook 2010

In Contacts, on the Home tab, in the New group, click New Contact Group.

In the "Name" box, type in the name of the Distribution List, i.e., "Committee Members".

On the Contact Group tab, in the Members group, click Add Members, and then click From Outlook Contacts, From Address Book or New Email Contact

1. If you are adding a new email contact, enter the information for the person in the Add New Member dialog box.

If you are adding a member from Outlook Contacts or an Address Book, do the following:

1. In the Address Book drop-down list, click the address book that contains the email addresses that you want to include in your Contact Group.
2. In the list of names, click the names that you want, and then click Members. You can add names from different address books to the same Contact Group.

1. Do this for each person whom you want to add to the Contact Group, and then click OK
2. Click Save & Close in the top left.

The Contact Group is saved in your Contacts folder under the name that you give it.

1. In Outlook, click on File > Options > Mail.
2. Click on Signatures.
3. Click the New button.
4. Type a name for your signature and click on OK.
5. In Choose Default Signature:
6. Select e-mail signature.
7. Select if you want your signature added to New messages.
8. Select if you want your signature added to Replies/Forwards.
9. In Edit Signature, you have serveral options:  Type your signature, insert a picture, insert your business card, or add an hyperlink.
10. Click on OK to return to your Mail.

Applies To: Faculty, Staff

To Create an envelope:

From the Ribbon, select the Mailings tab.
In the Create section, select the Envelopes button.
Under the Envelopes tab, enter the information for the Delivery address.
Enter the information for the Return adress if necessary.
Click Print to print your envelope.

Print will send your envelope to your default printer.
If you have a laser jet the bypass tray will have a diagram of how to place your envelope.
If you have a BizHub the envelope is loaded in the bypass tray with the side to be printed on facing down and the top towards you.

Applies To: Faculty, Staff

Apple has great tutorials on their site.  Please click here to find out more about iWeb.

Technology work request tickets can be created simply by emailing your request to helpdesk@wlu.edu from a W&L email address. Your request will automatically be turned into a request ticket, and you will be sent a ticket confirmation.

You can reply to that email to update the job with further details, or simply send a new email to helpdesk@wlu.edu with the subject line Ticket your ticket number . (E.g. Ticket 12345) and your update in the body of the email.

Applies To: Faculty, Staff, Students

There's not a direct way from the file menu, but you can do the following to save that group as a distribution list:

1. In the e-mail message you want to copy the names from, highlight the names in the To or Cc box.

2. Right-click and select Copy.

3. On the File menu, click on the down arrow next to NEW, and then select Distribution List.

4.  In the "Name" box, type a name for the distribution list.

5. Click "Select Members".

6. In the Members field, right-click, choose "Paste" and then OK. 

7. Click the "Save and Close" button to create the distribution list.

The first time you send to the distribution list, you will have to click CTRL + K, or the "Check Names" button to make the name of the list auto-complete.

No, unfortunately not. From the Box.com website:

Box for Office is not compatible with the following products:

• Office 2007 or older
• Windows XP or older
• Any version of Office for Mac
  • Unfortunately, the Mac version of Office is not nearly as extensible as the version on Windows, so it is not currently possible for developers to create as rich of an integration.

Create a distribution list by copying names from an Excel chart or received e-mail message.   
  
1.If using Excel copy the column.
2.In the message that you want to copy the names from, select the names in the To or Cc box. 
3.Right-click your selection, and then click Copy on the shortcut menu.
4.In Contacts on the Home ribbon New - Click New Contact Group and Name it.
5.On the Contact Group ribbon Members - Click Add Members and select from Outlook Contacts.
6.At the bottom of the Select Members dialog box, in the Members box, right-click and then click Paste on the shortcut menu. 

Note   A member does not need to be in your Address Book in order to be added to the distribution list. The member's name and e-mail address will be included when you copy and paste from the original e-mail message.

7.Click OK.
8.Click Save & Close.

Applies To: Faculty, Staff

1. Open the folder: \\maltiris2\SoftwareDelivery\Microsoft\Management Tools

2. Open the appropriate folder and install the MMC

3. Select the Windows Start button and search for "Turn Windows Features On" and open the application.

4. Expand Remote Server Administration tools

5. Open Role Administration Tools

6. Open AD DS and AD LDS Tools

7. Open AD DS Tools

8. Check Active Directory Administrative Center

9. Select OK

Applies To: Faculty, Staff

In Outlook 2007 and domain computers, there is a group policy object in place that prevents caching mode.  If a computer is NOT in the domain OR is using Outlook 2010, then that policy does not apply, and by default, cached mode gets turned on. 

To turn it off, go to File, Account Settings, Account Settings.  Select her name, hit change.  “Use cached exchange mode” should be unchecked.

Restart Outlook