Anything that broadcasts its own signal is an unauthorized extension of the W&L network, and is banned by the University's Acceptable Use Policy.

Some Macintosh computers have the capability of creating their own ad hoc wireless networks. Please disable this capability by taking the following steps:

1. Go to "System Preferences"
2. Click on "Sharing"
3. In the left-hand pane, uncheck "Internet Sharing"

Log into print upload screen

On the left click "Recent Print Jobs"
Review your printing
If you see charges that you believe are in error on the far right side under status Click request refund and fill in two questions

• Refund Amount - is it Full or Partial?
• Reason for Request - you may have printed two copies, a copy might not have printed OR you printed for an organization on campus
  • If you printed for an organization on campus you'll need to provide the name of the organization
  • If you printed for an organization on campus you'll need to provide the 6 digit account number to charge
• Click Send

Please see the Request Refund document under related resources to the right for photos.

Applies To: Students

If you're a W&L faculty member, staff or student, use any available Internet connection, on-campus or off-campus, and use a Web browser to access this page:

http://wireless.wlu.edu

Follow the steps, entering your W&L username and password when prompted. After you complete this step, you'll connect to W&L's wireless network automatically whenever you're in range.

If you're not a member of the W&L community, find the wireless network named "wlu," connect, and open a Web browser. Enter your e-mail address, or, if you're a sponsored guest and have been provided with credentials for temporary access to W&L's wireless network, enter the user name and password that was provided to you.

Please note that wireless is a limited resource, and minor disruptions are common; see Statement on Wireless Service at W&L

Applies To: Faculty, Staff, Students

Various restrictions apply to the guest wireless network, including limited speed, and restricted access to some web sites, including Facebook. W&L faculty, staff and students can get the best quality connection by registering for W&L's secure wireless network. To do that, point your browser on your wireless device to http://wireless.wlu.edu and follow the directions.

One of the reasons may be a printer setting.  Open up the selected printer to see if the PRINT TO FILE box has become checked on the selected printer.  If it has uncheck that setting.

The map of wireless network coverage is located here.

The wireless network for W&L faculty, staff and students uses a technology called 802.1x, which provides security by encrypting all network traffic.

Some older computers do not support this technology. However, most modern, up-to-date wireless devices will run on the secure wireless network:

• Windows computers with security features enabled, including auto-updates, firewall and up-to-date operating system
• Macintosh computers with security features enabled, include firewall and up-to-date operating system
• Apple iPad and iPod Touch
• Most Smart Phones with wireless capability, including iPhone, Blackberry, and Android-type phones

Game devices such as the Xbox 360 and Wii and other special-purpose network devices such as the Roku do not function on the secure wireless network. For such devices, use a wired connection, or register them for use on the wireless network.

Please note that wireless is a limited resource, and that minor disruptions are common; see Statement on Wireless Service at W&L

Whenever possible, use the tool at http://wireless.wlu.edu  to configure your device for use on W&L's wireless network.

You may need to manually configure some devices. The settings are:

• SSIDD: WLUsec
• Wireless Encryption: WPA2 Enterprise
• Authentication Protocol: MS-CHAPv2/PEAP
• Outside tunnel authentication: This should be left blank
• Inside tunnel authentication: WLU Username and Password
• Security certificate verification: Equifax Secure Certificate Authority

1. Edit the following file:  /etc/wpa_supplicant/wpa_supplicant.conf2. Copy and paste the following entries:

network={
     ssid="WLUsec"
     scan_ssid=1
     key_mgmt=WPA-EAP
     pairwise=CCMP TKIP
     group=CCMP TKIP
     eap=PEAP
     identity="WLU Username"
     password="WLU Password"
     ca_cert="/etc/ssl/certs/Equifax_Secure_CA.pem"
     phase1="peaplabel=0"
     phase2="auth=MSCHAPV2"
}

3. Save the wpa_supplicant.conf changes
4. Restart the WPA supplicant with the following command: /etc/init.d/wpa_supplicant restart5. Restart networking with the following command: /etc/init.d/network restart

Applies To: Students

Applies To: Students

802.1x is a network protocol that provides an authentication mechanism to devices connecting to a wired or wireless network. Washington and Lee employs 802.1x on its wireless network, "WLUsec." An additional level of security is provided by encrypting all traffic on the wireless network.

Devices must be configured in order to function properly on an 802.1x network; at W&L, wireless devices may be configured by connecting to the Web page at http://wireless.wlu.edu and following the steps as prompted.

The WLU wireless network allows users to access the network for a short period with authenticated access, or a long period with secure access. If you are just visiting campus for a day you should attach to the "wlu" wireless networks. If you are going to be using our wireless network frequently you will want to register for the secure wireless network. Registering on the secure network allows you to remain attached to the network without having to reauthenticate, and it encyrpts your network traffic so it is secure. To register on the Secure network go to Http://wireless.wlu.edu .

If you are not formally associated with WLU you can access the network as a guest by attaching to the "wlu" network. This network has some restrictions.    

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff

Yes! Both secure (for W&L students and employees with AD credentials) and access for guests.

1. At the Home screen, press the Menu key.

2. Scroll to the Manage Connections icon and press the trackball.

3. Scroll to Wi-Fi (not all Blackberry phones have this option; if you don't see it, it's not available for your model). Press the trackball to place a check mark in the box to turn on Wi-Fi.

To scan for and connect to available networks, perform the following steps:

1. At the Home screen, press the Menu key.

2. Scroll to Set Up Wi-Fi Network and press the trackball.

3. Scroll to Next and press the trackball.

4. Select Scan for Networks. The handheld scans and displays available networks.

SELECT WLUsec

5. Press the trackball to connect.  Enter your W&L network user name and password

Applies To: Faculty, Staff, Students

In Internet Explorer:

1. Go to File, then Print Preview

2. The fifth icon from the left is "Turn off Headers and Footers" Click it.

3. Print.  The headers and footers should be gone.

In Firefox:

1. To to File, then Print Preview

2. Click Page Setup.

3. Click the Margins and Headers/Footers tab.

4. Use the drop down menu to choose how you want the headers or footers to appear, if you want to remove them use the -blank- option.

5. Close and Print.

If you're a W&L faculty members, staff or student, use the Safari or Firefox browser (NOT Chrome) and use any available connection to access this Web address, from on campus or off campus:

http://wireless.wlu.edu

Follow the instructions, and enter your W&L username and password. When you've completed these steps, you'll automatically connect to W&L's secure wireless network whenever you're in range.

Please note that wireless is a limited resource, and minor disruptions are common; see Statement on Wireless Service at W&L

Applies To: Faculty, Staff, Students

1. Go to the Settings app
2. Select Wi-Fi
3. Make sure Wi-Fi is on and choose the "WLUsec" network
4. Enter your W&L network username (without the @mail.wlu.edu or @wlu.edu part) and password and tap Join
5. When prompted to accept the network certificate, tap the Accept button
6. Enter your device's passcode if prompted
7. A checkbox next to the WLUsec network and the Wi-Fi signal icon in the status bar at the top should indicate that you are now connected to the network

Applies To: Faculty, Staff, Students

Here’s a couple of advanced troubleshooting tips:

1. Make sure you run Cloudpath from Safari or Firefox. Cloudpath does not work correctly with Google Chrome.
2. Go to the Apple > System Preferences > Network > Airport > Advanced > Airport and remove “WLUsec” and “WLU”.
3. Go to the Apple > System Preferences > Network > Airport > Advanced > 802.1x > User Profiles > “-” key will delete “WLUsec profile.”
4. Select “Ok”
5. Select “Apply”
6. Select “Turn Airport Off” for about a minute. This is the equivalent of starting over.
7. Select “Turn Airport On”
8. Choose the “WLU” wireless network
9. Log in to the portal and re-run Cloudpath from wireless.wlu.edu

Go to Settings > Wireless Controls > Turn on WiFi 
 
In WiFi settings select wlusec
 
Enter your username and password

Applies To: Faculty, Staff, Students

Applies To: Faculty, Staff

Applies To: Faculty, Staff

IDENTIFYING YOUR MAILBOX WITH YOUR NAME

1. Access your PhoneMail box
2. Press 8 for Answering Options
3. Press 4 to Record Name (RECORD FIRST AND LAST NAME ONLY)
4. Press 1 to begin recording
5. Press * # when done

Applies To: Faculty, Staff, Students

First accept the terms and conditions.

Next view your "PDF"

Open and File/Print

1.    To begin using the Kindle, you will need to register it with your Amazon account. If you do not have an Amazon account, one can be easily created for free online. http://www.amazon.com/

2.     Use the 5-Way Control Knob to navigate the cursor to “Register” and click the control knob to select. Then type in your Amazon account email address and password to activate the device under your account and navigate down to “Select”. PLEASE BE SURE TO DEREGISTER THE DEVICE BEFORE RETURNING IT TO THE LIBRARY (see steps 6 and 7).

3.     In order to view items currently on the Kindle, hit the “Home” key and if the top of the screen does not say “Showing All ~ Items”, go to the top of the screen and navigate the cursor left to scroll between “Personal Documents” (PDFs, etc), “Subscriptions” (Newspapers, Magazines, and Blogs), “Books” (Amazon Kindle Books), and “All My Items” (All Items). Select the type of content you want, and browse.

4.     In order to put new content on the Kindle, you can either purchase and download content wirelessly from Amazon in the Kindle Store (accessed by hitting the “Menu” button and selecting “Shop in Kindle Store”), or you can add content directly by plugging it into your computer through the provided USB cable. Once you have plugged in the kindle to your computer, simply moved the desired files into the “Kindle” folder that will appear automatically under My Computer, and they will appear under “Personal Documents” on the Kindle.

5.     While viewing a document, flip between pages using the “Prev Page” and “Next Page” buttons. You can also using the “Aa” key on the keyboard to change the size of the font, screen rotation, and Text-to-Speech options.

6.     Before returning the Kindle, please check in “Personal Docs” (see step 2) to ensure that all of your documents have been deleted (navigate down to the document and press the directional knob to the left, then select delete, and confirm deletion) to ensure your items will not be left for future patrons.

7.     Before returning the Kindle, PLEASE BE SURE TO DEREGISTER THE DEVICE FROM YOUR AMAZON ACCOUNT. This is to ensure that no future patrons could accidentally access the Amazon Store through your account to purchase books or other content. Hit the “Menu” button, and scroll down to “Settings”. Once in the “Settings and Device Information” screen, navigate to and select “Deregister” and select “OK” in the following dialogue box.

1. Approved media (envelopes, postcards) should be made from the following paper types (card stock, white wove, bond paper, recycled paper, manila) with no glossy surfaces.

2. Approved media should be without windows, metal clasps, and be unstuffed and unsealed.

3. Media sizes are from a minimum of 3 x 5 inches to a maximum of 11 x 13 inches.  Thickness is from 0.003 inches to 0.125 inches.

4. Envelopes should have the flap along the long edge and may have either a straight or diagonal edge along the envelope flap.

5. All media is addressed with black ink with no special fonts available.

Assuming you're talking about the region for the DVD device, it's a difficult question to answer. The only real way to set it is to insert a disc into the optical drive and wait for the regional interface to appear, and then select your region. I do believe, however, that the region can only be changed so many times before it becomes locked in place. Alternatively, you can download a piece of software known as VLC Media Player, which ignores the region protocol and will allow you to play media from any region so long as you have it set to the default media player instead of Apple's DVD Player.

1.In the email setup application, on the Email Accounts screen, press the Menu key.

2. Click Add Email Account.

3. Click your email account type. (Other if you do not see exchange)
4. Type your email address and password. Click Next.
5. For most types of email addresses, click POP/IMAP (Most common).

Provide the advanced setup information for your email address.

Click Next.

Applies To: Students

Click the small button by the USB port on the bottom to turn on the screen. Swipe the yellow arrow left to unlock.

When the main screen appears, touch the small gear icon in the upper right. When the settings menu drops down, touch “Wi-Fi”.

Pull down if necessary, and touch WLUsec in the network list. When the form comes up, leave PEAP and select “MSCHAPv2” under Phase 2 Authentication, scroll on down, and put your AD username in the Identity box (ad\username). Type your AD password into the Password box, and touch Connect at the bottom. It should connect easily within a moment or two.

If you need to print out your results from a Sakai evaluation from Tests & Quizzes, here is how to do it.

1. Click on Tests & Quizzes ana navigate to Published Assessments tab.
2. Choose “Scores” from Select Action button next to evaluation
3. Choose “Statistics” from gray top menu; this opens Sakai’s report panel
4. Right click in report frame and select “This Frame -> Print Frame…” This will print out the entire report.
5. You can also export results to an Excel spreadsheet. Choose “Export” from top gray menu to do this.
6. In the exported file, individual students are listed by row. Questions are listed by column.

Applies To: Students

Select the worksheet(s) you want to print.

On the Page Layout tab, in the Sheet Options group, select the Print check box under Gridlines.

This prints the faint gridlines and not the bold table lines.

Outlook Delegates

There are major steps in order to use Outlook Delegates. The first is to select the user and add him as a delegate. You then must share your mailbox to that user.

1. Go to File and choose Info
2. Go to account settings and choose Delegate Access
3. Delegates Tab and click Add
4. Select the user who wish to grant access to and click Add and then Ok

Note: There are more options you can choose from once you select OK after adding that user. Nothing in the next window is necessary to grant send on behalf.

1. When back at the main Outlook window, in the Folder List, choose your mailbox at the root level. This will appear as Mailbox – Full Name
2. Right-click and choose Change Sharing Permissions
3. Click the Add button
4. Select the user who wish to grant access to and click Add and then Ok
5. In the permissions section, you must grant the user at minimum, Non-editing Author.

A user wanting to send 'on behalf of' will need to a start new email, go to Options, Select the From item and search on the person that has allowed them delgate access.

1.      Open Publisher

2.      File > New

3.      There is a box in the top right that says “Search for Templates”

4.      In that box, type, “5392” (or the form number) and hit “Enter” or click on the magnifying glass.

5.      The template for the badges should appear. In the bottom right corner, click on Create.

6.      Click on the Mailings tab

7.      Select Mail Merge (down arrow) > Step by Step Mail Merge Wizard.

8.      On the right side, under Create recipient list, choose Use an Existing List

9.      Click Next: Create or connect to a recipient list. A browse screen should appear. Browse to the excel file with the names.

10.  Click Next: Prepare your Publication. Choose Sheet 1 when you are prompted.

11.  Click OK.

12.  Grab the Class List for Course Name Winter ’12 (highlighted below in yellow) and drag it to the name badge field:

13.  Select “F2” and drag it below the Class List for Course Name Winter ’12.

14.  Put your cursor above Class List for Journalism and type in "Title of your Event"

15.  Highlight everything and center justify, make any changes to the font (bold, etc.)

16.  Select Create Merged Publication.

17.  Select Print Preview and make sure you’re happy with the editing. If not, click on Previous: Prepare your publication down at the bottom of the screen.

18.  Select Print - Merge to Printer when you’re happy with it.

Applies To: Faculty, Staff

1. Choose the print command from the Office button menu.

2. In the “Print What” list box choose the “Notes Pages” option.

3. Select the “Print Hidden Slides” check box to print note pages for

    hidden slides if you have hidden slides

4. Click OK or press Enter.

The library has a web page with information about printing posters. You can access the page here.

• Submissions for printing will be accepted from CD-R, CD-RW, DVD, flash/thumb/USB drive, and Sakai.
  To upload an poster to Sakai: (1) Login (2) Go to "My Workspace" (3) Select "Membership" (3) Select "Poster Printing Drop Box" (4) Go to the folder with your name and click "Add" and "Upload Files."
• The following file formats will be accepted: jpg, tiff, or PDF, as well as, images from the following software programs: Adobe Photoshop, MS Publisher, MS PowerPoint, or Adobe Acrobat.
• Clients are encouraged to speak with University Library and/or ITS Staff prior to printing for training in preparing items. Contact Elizabeth Anne Teaff to schedule an appointment to setup a time to meet with one of our staff members.
• Printing services will be assessed at the rate of $15.00 for standard posters (up to 30” by 42”) and $20.00 for larger items.
• Departments wishing to print posters for advertising purposes, will be assessed at the rate of $30 per poster. A $5 fee will be added to the standard poster price if the due date for the poster is the same day the poster printing request is made.
• Individuals who place jobs to be printed, but fail to claim or pay for this service, will have a fee of $20.00 charged to their University account.
• Jobs that fail to meet client expectations will still be charged, unless University Library or ITS Staff was working with the client and they approved the file for printing.
• Printed items may be picked up at the Information Desk of the Leyburn Library. Cash, check, and/or General Debit will be accepted. Departmental Charges will be billed quarterly to the appropriate University account.

• Printing services will be assessed at the rate of $15.00 for standard posters (up to 30” by 42”) and $20.00 for larger items.
• Departments wishing to print posters for advertising purposes, will be assessed at the rate of $30 per poster. A $5 fee will be added to the standard poster price if the due date for the poster is the same day the poster printing request is made.
• Individuals who place jobs to be printed, but fail to claim or pay for this service, will have a fee of $20.00 charged to their University account.
• Jobs that fail to meet client expectations will still be charged, unless University Library or ITS Staff was working with the client and they approved the file for printing.
• Printed items may be picked up at the Information Desk of the Leyburn Library. Cash, check, and/or General Debit will be accepted. Departmental Charges will be billed quarterly to the appropriate University account.

To Create an envelope:

From the Ribbon, select the Mailings tab.
In the Create section, select the Envelopes button.
Under the Envelopes tab, enter the information for the Delivery address.
Enter the information for the Return adress if necessary.
Click Print to print your envelope.

Print will send your envelope to your default printer.
If you have a laser jet the bypass tray will have a diagram of how to place your envelope.
If you have a BizHub the envelope is loaded in the bypass tray with the side to be printed on facing down and the top towards you.

Applies To: Faculty, Staff

Yes you can print both in the same document.

Under the Page Layout Ribbon you have the Orientation and Breaks options.

When you get to where you want the next Orientation you click on Breaks and Select Next Page and then change the Orientation.

You can do this throughout the document.

These instructions provide a general map for configuring your account. If your Android menues offer you different choices than those decribed below try to pick the closest match.

1. Go to Settings
2. Choose "Accounts & Sync"
3. Remove any non-functioning accounts
4. Choose "Add Account"
5. Choose "Exchange and Active Sync"
6. Choose "Manual Setup"
7. Enter your email address
8. Enter "owa.wlu.edu" as your Server address
9. Enter "ad" as your Domain
10. Enter your username as "ad.wlu.edu\username" and password
11. Check the  "This server requires an encrypted SSL connection." Box.
12. Choose "Next"
13. Select the items you wish to sync. 
14. Choose "Finish Setup"
15. At this point you will be asked to accept the security policy and set a PIN if you do not have one.

Applies To: Faculty, Staff

Try these steps from Microsoft on rebuilding your identity database.

Applies To: Faculty, Staff

Save your Excel chart as a .pdf file.  Then it will hold onto the printing when sent to the BizHub.

Applies To: Students

Not initially.  The Safe Senders list can only be set up by enabling Automatic Email Filtering (Junk Folder) in Outlook Web Access (http://owa.wlu.edu) Once complete you can manage your safe senders list in Outlook 2010 and 2013.

Applies To: Faculty, Staff

Applies To: Students

Open Word 2010, click on Mailings tab on the Ribbon:

1.Click on Envelopes
2.Click on Options
3.Under Delivery Address, click on Font
4.Choose desired Font, i.e. Calibri, Regular, Size 12
5.Click on Set As Default and select Yes (Do you want to change the default envelope address font to Calibri, 12pt?)

Then, click on Font under Return Address
Repeat steps 3 to 5.
click on OK, then click on Close.
Save the document.

If the default goes back to +Headings.
Show hidden files then edit the Normal.dot template in
Documents and Settings\user\Application Data\Microsoft\Templates\normal.dot and save. 



 

Applies To: Students