Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff, Students

1. Get  the slide scanning positioning plate and light bar from the Information Desk
2. Place the positioning plate on the scan bed.
3. On the back of the scanner, find the round TMA port and plug the light bar into it (with the indicator arrow on top).
4. Fit the slides/or negatives into the light bar using the built in adapters.  (Note: Make sure that the shiny side of the slide/negative faces the scanner glass not the lightbar).
5. Place the light bar (load with slides/negatives) in the positioning tray.
6. Press the Scan Picture button on the front of the scanner.
7. In the HP Scanning dialog box, select “Scan slides using transparent materials adapter” or “Scan negatives using transparent materials adapter”. Click Scan.
8. When you are finished scanning, click Scan to scan another slide or negative, or Click Done.

Applies To: Faculty, Staff, Students

Install the correct Driver:

Before you can install the printer you will need to download and install the appropriate driver for your Operating System.   Click on the link for your operating system below to start the download.  (to find your Operating System click on the Apple and choose “About this Mac”)

            10.7 Lion

            10.8 Mountain Lion

            10.9 Mavericks

Delete all MPS3 network printers:

Open System Preferences and select the Print & Scan Icon, and then delete all MPS3 printers.

Install the new printer:

  In the Print & Scan Preference Panel:

·         Click on the + to add a printer, and choose “Add other printer or Scanner”.

·         In Default, scroll down to select the name of the printer starting with MPS4.

·         Each BizHub has a print queue (see example below)

o   MPS4-ITS_Tucker_BizHub

·         The Name and Location will be automatically populated.

·         Click on pull down “Choose a Driver or Printer Model”

o   Select Printer Software

o   In the Filter box, type Konica

o   If the drivers have been installed, you will see a list

o   Select the appropriate PS driver for your BizHub model then click on Add.

o   select either C284e or 364e: 

§  Konica Minolta C284e PS

§  Konica Minolta C364e PS

o   Click ‘Add’

·         Go to System Preferences -> Print & Scan

·         Select your BizHub from the list of Printers,

·         On the right, click on Options & Supplies

·         Select Driver tab to configure the printer:

o   Model:   C284e or C364e

o   Paper Source Unit:  PC-410

o   Finisher:   FS-534

o   Punch Unit:  PK-519 (2/3-Hole)

o   Click on OK.

·         If you wish to make it your default printer, right-click on the BizHub icon, then select ‘set default printer’.

Applies To: Faculty, Staff

• Library staff will be available to assist in the design phase of projects. Contact Elizabeth Anne Teaff to schedule an appointment or drop by the Information Desk Monday through Thursday from 4-8 pm. and ask for Brandon Bucy.
• Items to be scanned may be dropped off at the Information Desk of the Leyburn at any time. We will have a turnaround time of 2 business days.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Students

• The University Library has two large format scanners: one scanner for delicate and fragile items and one for maps and other large documents.
• To use either scanner, items must be larger than 8½” x 11”. Small items may be scanned using one of the many available campus scanners. The Leyburn Library has several scanning stations on the Main Floor. Campus photocopy machines may also be used for scanning.
• Items to be scanned may be dropped off at the Information Desk of the Leyburn at any time. We will have a turnaround time of 2 business days.
• Scanned images will be saved to CD/DVD, clients’ flash/thumb/USB drive, or the web. The University Library has flash drives that may be checked out for a period of 24 hours and used to transport images.

• In cases of large, on going scanning projects fee may be assessed at a rate of $8.00 per hour. Cash, check, and/or General Debit will be accepted. Departmental Charges will be billed to the appropriate University account.

Applies To: Faculty, Staff

COPYING:

Enter your Userid (the PIN for your department/program or your W&L ID number for personal student copies).  Tap on the Color button, then tap on Full Color.  Tap OK, and make your copies.

PRINTING:

In Windows, go to Properties or Preferences (depending on the application) from the Print dialog box.  Select the Quality tab, and choose Full Color from the Select Color drop-down menu.  Click OK, then print your document.

NOTE that color pages cost $.15/page for faculty/staff/institutional printing, and $.30/page for student personal printing.

Applies To: Students

·         More Web browsers supported (listed below)

·         Conversation view: Conversation view lets you see all messages in a thread, including messages not in the current folder

·         Right-click: More actions have been added to the right-click menus in OWA

·         Messages: Forward an E-mail as an attachment

·         Favorites: Favorites makes it easier to access the folders you use the most

·         For a more complete listing, see the Microsoft article here: OWA 2010 New Features

Search the feature and the Rolm.  So you would search the key words of hold and Rolm to get your answer.

Applies To: Students

(For a more complete listing, please visit this site: http://support.microsoft.com/kb/2572191)

All on-campus student phones are installed and ready for use. The phone is a ROLM phone 120 with the following features:

• Single-line digital telephone with 12 special function buttons
• Eight common function buttons (hold, connect, transfer, volume up, volume down, flash, DND, message waiting)
• One button to indicate line is in use
• One-way speaker (you can hear but not speak)
• Two spare buttons to access many other options
• Four-digit dialing on campus
• PhoneMail (Rolm's voice mail)
• Do Not Disturb (DND) feature

Applies To: Students

Here are some of the most common symptoms and solutions to authentication failure to W&L web applications:

1. You are repeatedly presented with a login prompt, which never is successful.  You are using a personal computer, or are off campus.    Try entering your user name with the prefix "AD\" .  E.g.   AD\MyAccountName  .  W&L's Active Directory domain is named "AD".  This prefix tells the web server which domain to authenticate against.
2. The previous step does not work, but in the popup, you see an option similar to "Use Another Account".  Select that option, and use the AD\ prefix.  In this case, your browser is using your computer's name as the authentication domain, and is ignoring the AD\ prefix.
3. Has your W&L password expired?  Has it been more that one year since you changed it?  You may do so at http://password.wlu.edu.
4. You are using FireFox version 30.0 on a Mac or Linux workstation.  Release 30 breaks Windows authentication.  See the following for a fix: http://managementtools.wlu.edu/Help/Resources/1/271.pdf
5. You are using FireFox version 40, and accessing an unauthenticated page with authenticated content embedded in it.  This version of FireFox intentionally disables this if the page and content are in different domains.  You can configure Firefox to allow this, or use a different browser.
6. You are using Safari, and receiving the error "request body stream exhausted".  This is a bug with Safari authentication.  Use a different browser.
7. You are on an iOS device, recently updated to version 7.  This update breaks windows authentication for some iOS devices like iPhones or iPads.  Use another device.
8. You are never presented with a login prompt.  You are using Internet Explorer on a W&L computer, from off campus.  Integrated Windows login is failing because the browser can not communicate with a W&L AD Domain Controller from off campus.  Use another browser or temporarily disable Integrated Windows authentication: https://managementtools.wlu.edu/Help/Default.aspx?col=1&q=unable+log+login

If none of these solutions work, try going to http://MyVI.wlu.edu and opening a web browser from the APPS screen.  Then, you will effectively be using a W&L computer, and on campus.  This will bypass many issues associated with using personally owned computers.

If one takes a W&L laptop that is in the W&L AD domain off campus and then attaches to a site that is in the IE 'Local Intranet' security zone, the laptop attempts to do pass-through integrated windows login.  However, this requires that the computer has direct access to an AD domain controller, which is blocked in the firewall.  Unfortunately, IE does not gracefully fall back to a username and password prompt in this case.

To configure IE to always prompt for a username and password:

1.       Open Internet Explorer

2.       Select “Tools”

3.       Select “Internet Options”

4.       Select “Security”

5.       Select “Local  intranet”

6.       Select “Custom level…”

7.       Scroll all the way to the last option and select “Prompt for user name and password”

8.       Select “OK” to exit both dialog windows

To re-configure IE once you are back on campus, follow the same procedure, but in step 7, select “Automatic logon only in Intranet zone”