COPYING:

Enter your Userid (the PIN for your department/program or your W&L ID number for personal student copies).  Tap on the Color button, then tap on Full Color.  Tap OK, and make your copies.

PRINTING:

In Windows, go to Properties or Preferences (depending on the application) from the Print dialog box.  Select the Quality tab, and choose Full Color from the Select Color drop-down menu.  Click OK, then print your document.

NOTE that color pages cost $.15/page for faculty/staff/institutional printing, and $.30/page for student personal printing.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff, Students

Install the correct Driver:

Before you can install the printer you will need to download and install the appropriate driver for your Operating System.   Click on the link for your operating system below to start the download.  (to find your Operating System click on the Apple and choose “About this Mac”)

            10.7 Lion

            10.8 Mountain Lion

            10.9 Mavericks

Delete all MPS3 network printers:

Open System Preferences and select the Print & Scan Icon, and then delete all MPS3 printers.

Install the new printer:

  In the Print & Scan Preference Panel:

·         Click on the + to add a printer, and choose “Add other printer or Scanner”.

·         In Default, scroll down to select the name of the printer starting with MPS4.

·         Each BizHub has a print queue (see example below)

o   MPS4-ITS_Tucker_BizHub

·         The Name and Location will be automatically populated.

·         Click on pull down “Choose a Driver or Printer Model”

o   Select Printer Software

o   In the Filter box, type Konica

o   If the drivers have been installed, you will see a list

o   Select the appropriate PS driver for your BizHub model then click on Add.

o   select either C284e or 364e: 

§  Konica Minolta C284e PS

§  Konica Minolta C364e PS

o   Click ‘Add’

·         Go to System Preferences -> Print & Scan

·         Select your BizHub from the list of Printers,

·         On the right, click on Options & Supplies

·         Select Driver tab to configure the printer:

o   Model:   C284e or C364e

o   Paper Source Unit:  PC-410

o   Finisher:   FS-534

o   Punch Unit:  PK-519 (2/3-Hole)

o   Click on OK.

·         If you wish to make it your default printer, right-click on the BizHub icon, then select ‘set default printer’.

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Faculty, Staff

Applies To: Students

Applies To: Faculty, Staff

Applies To: Students

Bcc is an abbreviation for blind carbon copy. If you add a recipient's name to the Bcc box in an e-mail message, a copy of the message is sent to the recipient, but the recipient's name is not visible to the other recipients of the message.

1.     If that is the folder you want, you can move it or copy it to the new location by going to the Resources section, check the checkbox next to the folder name, and choose Copy or Move from the Actions menu.

2.     After you’ve clicked on Copy or Move, you need to select the “Show Other Sites” link at the bottom of the screen.

3.     Browse to the site where you’d like to copy or move your folder.  Click the checkbox next to the folder where you want the links folder to go (Probably the top level Resources folder) and select Paste Copied Items from the Actions Menu.

See the screen shots in the Resources Document

Applies To: Faculty, Staff

·         More Web browsers supported (listed below)

·         Conversation view: Conversation view lets you see all messages in a thread, including messages not in the current folder

·         Right-click: More actions have been added to the right-click menus in OWA

·         Messages: Forward an E-mail as an attachment

·         Favorites: Favorites makes it easier to access the folders you use the most

·         For a more complete listing, see the Microsoft article here: OWA 2010 New Features

In a new message, on the Message Options tab, in the Fields group, click Show Bcc.

1. Create the new calendar in sharepoint, and link it to your Outlook
2. Open the source Outlook calendar (either from exchange or as a PST, however you have it).
3. Go to folder view and open the source calendar
4. With the source calendar open, go to view menu, current view, and select all appointments.
5. Hit CTRL-A to select all the appointments, or just get the ones you want.
6. Drag-and-drop the selected calendar Items to the linked sharepoint calendar

You can move or copy multiple files all at once:

1.      Go to the Resources area of the course with the files that you want to move or copy.

2.      To the left of each folder and file is a checkbox. Check the checkbox for every file you want to move.

3.      Look at the top of the list, just above the top gray bar. You should see 3 links: Copy, Remove and Move.

4.      Click on the Move or Copy link.

5.      Click on the Show Other Sites link.

6.      Select the appropriate folder from the list.

Applies To: Faculty, Students

Transcripts are requested through the Registrar's Office. Information can be found on this page: http://www.wlu.edu/x33519.xml

If you are a graduate you don't have access to WebAdvisor anymore. Go to the Registrar's Office page (link above) and Click the Transcript Request Form under the Alumni Header. Print and mail or fax in the request. As alum you will receive an official transcript.  To make it unofficial you need to make a photocopy of the hard copy. 

Click this link found by our Mac technician.

Applies To: Students

Search the feature and the Rolm.  So you would search the key words of hold and Rolm to get your answer.

Applies To: Students

(For a more complete listing, please visit this site: http://support.microsoft.com/kb/2572191)

All on-campus student phones are installed and ready for use. The phone is a ROLM phone 120 with the following features:

• Single-line digital telephone with 12 special function buttons
• Eight common function buttons (hold, connect, transfer, volume up, volume down, flash, DND, message waiting)
• One button to indicate line is in use
• One-way speaker (you can hear but not speak)
• Two spare buttons to access many other options
• Four-digit dialing on campus
• PhoneMail (Rolm's voice mail)
• Do Not Disturb (DND) feature

Applies To: Students

Here are some of the most common symptoms and solutions to authentication failure to W&L web applications:

1. You are repeatedly presented with a login prompt, which never is successful.  You are using a personal computer, or are off campus.    Try entering your user name with the prefix "AD\" .  E.g.   AD\MyAccountName  .  W&L's Active Directory domain is named "AD".  This prefix tells the web server which domain to authenticate against.
2. The previous step does not work, but in the popup, you see an option similar to "Use Another Account".  Select that option, and use the AD\ prefix.  In this case, your browser is using your computer's name as the authentication domain, and is ignoring the AD\ prefix.
3. Has your W&L password expired?  Has it been more that one year since you changed it?  You may do so at http://password.wlu.edu.
4. You are using FireFox version 30.0 on a Mac or Linux workstation.  Release 30 breaks Windows authentication.  See the following for a fix: http://managementtools.wlu.edu/Help/Resources/1/271.pdf
5. You are using FireFox version 40, and accessing an unauthenticated page with authenticated content embedded in it.  This version of FireFox intentionally disables this if the page and content are in different domains.  You can configure Firefox to allow this, or use a different browser.
6. You are using Safari, and receiving the error "request body stream exhausted".  This is a bug with Safari authentication.  Use a different browser.
7. You are on an iOS device, recently updated to version 7.  This update breaks windows authentication for some iOS devices like iPhones or iPads.  Use another device.
8. You are never presented with a login prompt.  You are using Internet Explorer on a W&L computer, from off campus.  Integrated Windows login is failing because the browser can not communicate with a W&L AD Domain Controller from off campus.  Use another browser or temporarily disable Integrated Windows authentication: https://managementtools.wlu.edu/Help/Default.aspx?col=1&q=unable+log+login

If none of these solutions work, try going to http://MyVI.wlu.edu and opening a web browser from the APPS screen.  Then, you will effectively be using a W&L computer, and on campus.  This will bypass many issues associated with using personally owned computers.

If one takes a W&L laptop that is in the W&L AD domain off campus and then attaches to a site that is in the IE 'Local Intranet' security zone, the laptop attempts to do pass-through integrated windows login.  However, this requires that the computer has direct access to an AD domain controller, which is blocked in the firewall.  Unfortunately, IE does not gracefully fall back to a username and password prompt in this case.

To configure IE to always prompt for a username and password:

1.       Open Internet Explorer

2.       Select “Tools”

3.       Select “Internet Options”

4.       Select “Security”

5.       Select “Local  intranet”

6.       Select “Custom level…”

7.       Scroll all the way to the last option and select “Prompt for user name and password”

8.       Select “OK” to exit both dialog windows

To re-configure IE once you are back on campus, follow the same procedure, but in step 7, select “Automatic logon only in Intranet zone”